marlio

AP Calculus AB, Unit 5

Exam words: Analytical Applications of Differentiation

The 29 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.

Study these words as a deck

Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.

The words

  1. derivative function

    f′(x)f'(x)

    The function f′ whose output at each x is the slope of f there.

    Loses the mark: “a high derivative means a high function value”. A large derivative means f is steep, not that f is large.

    Example: Sketching the derivative function of the hike's elevation, we plotted the trail's slope at each kilometer.

  2. horizontal tangent

    A point where the tangent line is horizontal, so f′(x) = 0 there.

    Loses the mark: “every horizontal tangent is a turning point”. f′ can be 0 without changing sign, as for x³ at 0.

    Example: The roller-coaster track has a horizontal tangent at the top of the hill, where the derivative is 0.

  3. increasing on an interval

    Outputs rise as inputs rise on the interval, which happens where f′ > 0 throughout.

    Loses the mark: “increasing because f is positive”. Increasing depends on the sign of f′, not the sign of f.

    Example: The derivative is positive on (2, 5), so the account balance is increasing on an interval from day 2 to day 5.

  4. decreasing on an interval

    Outputs fall as inputs rise on the interval, which happens where f′ < 0 throughout.

    Loses the mark: “decreasing because f is negative”. Decreasing depends on the sign of f′, not the sign of f.

    Example: Since f′ < 0 on (0, 3), the ice block's mass is decreasing on an interval of the first three hours.

  5. Mean Value Theorem

    f′(c)=f(b)−f(a)b−af'(c) = \frac{f(b) - f(a)}{b - a}

    Continuous on [a, b] and differentiable on (a, b), f has f′(c) = average rate somewhere.

    Loses the mark: “f(c) equals the average”. The theorem matches a slope, f′(c), with the average rate, not a value.

    Example: The van's position is differentiable, and it averaged 40 mph, so by the Mean Value Theorem its speedometer read 40 mph at some instant.

  6. differentiable on the open interval

    The MVT's second hypothesis: f′ exists at every point strictly between a and b.

    Loses the mark: “the MVT works for any function”. Without continuity on [a, b] and differentiability on (a, b), no c is guaranteed.

    Example: The altitude model is differentiable on the open interval (0, 6) and continuous on [0, 6], so the theorem applies.

  7. Rolle's theorem

    Continuous on [a, b], differentiable on (a, b) and f(a) = f(b) means f′(c) = 0 somewhere.

    Loses the mark: “the function is smooth so Rolle applies”. "Smooth" is vague; state continuity on [a, b], differentiability on (a, b), and f(a) = f(b).

    Example: The ball leaves and returns to the same height, so by Rolle's theorem its vertical velocity is 0 at some moment.

  8. hypotheses of the theorem

    The conditions a theorem requires before its conclusion may be used; each must be checked.

    Loses the mark: “the function is nice so it works”. Name each hypothesis and show it holds; a general description earns nothing.

    Example: A polynomial is continuous and differentiable everywhere, so the hypotheses of the theorem hold on [1, 4].

  9. Extreme Value Theorem

    A function continuous on a closed interval attains an absolute maximum and minimum there.

    Loses the mark: “every function has a highest and lowest point”. Without continuity on a closed interval, the extremes may not exist.

    Example: The temperature is continuous on [0, 24], so by the Extreme Value Theorem it has a highest and lowest value that day.

  10. critical point

    An x-value in the domain of f where f′(x) = 0 or f′(x) does not exist.

    Loses the mark: “only where f′ is zero”. Points where f′ does not exist are critical points too.

    Example: The profit function has a critical point at x = 40, where its derivative is 0.

  11. absolute maximum

    The greatest output of f on its domain or a stated interval.

    Loses the mark: “the maximum is the x-value”. The maximum is the output f(c); c is where it occurs.

    Example: The absolute maximum of the population on [0, 10] is 820 birds, reached at the endpoint t = 10.

  12. absolute minimum

    The least output of f on its domain or a stated interval.

    Loses the mark: “the minimum is where f′ is smallest”. The minimum is the least value of f, not of f′.

    Example: The absolute minimum of the reservoir level was 12 meters, on day 30.

  13. candidates test

    To find absolute extrema on [a, b], compare f at critical points and endpoints.

    Loses the mark: “check only the critical points”. The endpoints must be checked too; an extreme can sit there.

    Example: The candidates test compared f at x = 0, x = 3 and x = 5 to find the cheapest production level.

  14. first derivative test

    Relative maximum where f′ goes positive to negative, minimum where negative to positive.

    Loses the mark: “because the derivative is zero at c”. A zero derivative alone does not classify the point; f′ must change sign.

    Example: By the first derivative test, the ride's height has a relative maximum at t = 8 because the derivative changes from positive to negative.

  15. f′ changes sign from positive to negative

    Justification for a relative maximum at c: f′ > 0 just left, f′ < 0 just right.

    Loses the mark: “the derivative equals zero there”. A zero derivative does not show a maximum; the sign change does.

    Example: The tide height f has a relative maximum at t = 6 because f′ changes sign from positive to negative there.

  16. f′ changes sign from negative to positive

    Justification for a relative minimum at c: f′ < 0 just left, f′ > 0 just right.

    Loses the mark: “the derivative is positive after c”. One side is not enough; both signs around c must be given.

    Example: The fuel cost f has a relative minimum at 55 mph because f′ changes sign from negative to positive there.

  17. relative maximum

    A value f(c) at least as large as every nearby value, at an interior point.

    Loses the mark: “the higher turning point is the maximum”. Relative means compared with nearby values; height against other turns does not decide it.

    Example: The ride has a relative maximum of 30 meters at t = 8, the top of its first hill.

  18. relative minimum

    A value f(c) no larger than any nearby value, at an interior point c.

    Loses the mark: “a sign change where f does not exist”. An extremum needs f defined at c; a sign change across a gap in the domain is not one.

    Example: The water level reached a relative minimum of 2 meters at low tide.

  19. concave up

    Where f′ is increasing (f″ > 0), the graph bends upward and lies above its tangents.

    Loses the mark: “concave up means going up”. Concavity is about the slope changing, not about f rising.

    Example: The hockey-stick sales curve is concave up because its slope keeps getting larger.

  20. concave down

    Where f′ is decreasing (f″ < 0), the graph bends downward and lies below its tangents.

    Loses the mark: “concave down means going down”. A rising graph can be concave down if its slope is shrinking.

    Example: The learning curve is concave down: scores keep rising, but more slowly each week.

  21. point of inflection

    A point where f is continuous and the concavity changes, as f″ changes sign.

    Loses the mark: “the second derivative is zero so it is an inflection point”. f″ must change sign; f″ = 0 alone is not enough, as for x⁴ at 0.

    Example: The outbreak's case curve has a point of inflection on day 20, where f″ changes from positive to negative.

  22. second derivative test

    If f′(c) = 0, then f″(c) > 0 gives a relative minimum and f″(c) < 0 a maximum.

    Loses the mark: “a zero second derivative means no extremum”. The test is inconclusive; use the first derivative test instead.

    Example: Since C′(50) = 0 and C″(50) > 0, the second derivative test shows the cost has a relative minimum at 50 units.

  23. sign chart

    A number line marking zeros, undefined points and signs of f′ or f″.

    Loses the mark: “the picture shows it”. Describing a sketch is not a justification; state the sign of f′ or f″ on each interval.

    Example: The sign chart shows f′ positive on (0, 2) and negative on (2, 5), so f has a relative maximum at 2.

  24. the graph of f′ is increasing

    On a graph of f′, where it rises, f″ > 0, so f is concave up.

    Loses the mark: “the derivative is positive so the function is positive”. The sign of f′ tells whether f rises, not whether f is above the axis.

    Example: The graph of f is concave up on (1, 3) because the graph of f′ is increasing there.

  25. relative extremum of f′

    A peak or valley on the graph of f′, where f changes concavity.

    Loses the mark: “the derivative crosses zero so there is an inflection point”. Where f′ crosses zero, f has a relative extremum; inflection points come from extremes of f′.

    Example: The graph of f′ has a relative extremum of f′ at x = 4, so f has a point of inflection at x = 4.

  26. objective function

    The quantity to optimize, written as a function of one variable using the constraint.

    Loses the mark: “optimize the constraint”. The constraint links the variables; the quantity to optimize is the objective.

    Example: Using the 100-meter fence as a constraint, the objective function for the pen's area is A(x) = x(50 - x).

  27. constraint

    An equation the variables must satisfy, such as a fixed perimeter.

    Loses the mark: “equal sides are always best”. The constraint decides the best shape; it is not always the symmetric one.

    Example: The constraint is that the box holds 500 cm³, so x²h = 500.

  28. feasible domain

    The interval of inputs that make physical sense, on which the absolute extremum is found.

    Loses the mark: “every critical point is an answer”. A critical point outside the feasible domain is discarded.

    Example: The width must lie between 0 and 50 meters, so the feasible domain is (0, 50).

  29. only critical point

    On an interval, a continuous function's only critical point, if a relative extremum, is absolute.

    Loses the mark: “the critical point is the answer”. Show it is a maximum or minimum, and absolute, on the feasible domain.

    Example: x = 25 is the only critical point in (0, 50) and A′ changes from positive to negative there, so it gives the absolute maximum area.