marlio

AP Calculus BC, Unit 1

Exam words: Limits and Continuity

The 32 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.

Study these words as a deck

Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.

The words

  1. limit

    lim⁡x→af(x)=L\lim_{x \to a} f(x) = L

    The value f(x) gets arbitrarily close to as x approaches a from both sides.

    Loses the mark: “the limit is f(a)”. The limit ignores the value at a; the two can differ, and f(a) may not exist.

    Example: As the oven dial x approaches setting 5, the table's temperatures close in on 180 degrees from both sides, so the limit of f(x) as x approaches 5 is 180.

  2. the limit does not exist

    Outputs fail to settle on one finite number: sides disagree, grow unbounded or oscillate.

    Loses the mark: “the limit is undefined”. "Undefined" describes a function value; for a limit, say it does not exist and why.

    Example: The thermostat readings jump from 18 to 22 at the switch time, so the limit does not exist there because the two sides disagree.

  3. one-sided limit

    The value f(x) approaches as x approaches a from one side only.

    Loses the mark: “one side is enough”. A two-sided limit needs both sides to agree; one side alone settles nothing.

    Example: The parking fee graph has a one-sided limit of 4 dollars from the left at 2 hours and 6 dollars from the right, so the two-sided limit does not exist.

  4. left-hand limit

    lim⁡x→a−f(x)\lim_{x \to a^-} f(x)

    The value f(x) approaches as x approaches a through inputs less than a.

    Loses the mark: “limit from below”. The minus sign in a⁻ describes inputs left of a, not outputs below L.

    Example: Just before the 3 p.m. price change the cost holds at 5 dollars, so the left-hand limit at 3 is 5.

  5. right-hand limit

    lim⁡x→a+f(x)\lim_{x \to a^+} f(x)

    The value f(x) approaches as x approaches a through inputs greater than a.

    Loses the mark: “limit from above”. The plus sign in a⁺ describes inputs right of a, not outputs above L.

    Example: Just after the 3 p.m. price change the cost holds at 7 dollars, so the right-hand limit at 3 is 7.

  6. piecewise-defined function

    A function given by different formulas on different parts of its domain.

    Loses the mark: “plug a into either piece”. Each side of the seam has its own formula; using the wrong piece gives the wrong one-sided limit.

    Example: The shipping charge is a piecewise-defined function, so the left-hand limit at 10 kg uses the light-parcel formula and the right-hand limit uses the heavy one.

  7. limit laws

    Rules giving the limit of a sum, product, multiple or quotient from its parts' limits.

    Loses the mark: “split the limit even though one part does not exist”. The laws need each part's limit to exist; otherwise they give no conclusion.

    Example: Because both readings have limits, the limit laws let us add them: the limit of the total flow is 3 plus 5, or 8 liters per minute.

  8. direct substitution

    Finding a limit by evaluating f(a), valid when f is continuous at a.

    Loses the mark: “just plug it in”. Substitution needs a reason: say the function is continuous at a.

    Example: The cooling model is a polynomial, so it is continuous and direct substitution gives the limit at t = 4 as 52 degrees.

  9. limit of a composite function

    If g(x) approaches L and f is continuous at L, then f(g(x)) approaches f(L).

    Loses the mark: “plug the inner limit into the outer function”. This works only when the outer function is continuous at the inner limit; say so.

    Example: The inner pressure reading approaches 4 and the square root is continuous at 4, so the limit of a composite function here is the square root of 4, which is 2.

  10. indeterminate form

    00\frac{0}{0}

    A result such as 0/0 from substituting into a limit, which says nothing about it.

    Loses the mark: “0/0 means the limit does not exist”. 0/0 is a signal to rewrite, not a conclusion; many such limits exist.

    Example: Substituting t = 2 into the flow formula gives the indeterminate form 0/0, so we factor before taking the limit.

  11. canceling a common factor

    Factoring top and bottom and dividing out the shared factor, since x never equals a.

    Loses the mark: “cancel the x terms”. Only factors of a product cancel; terms of a sum do not.

    Example: Canceling a common factor of (x - 3) turns the ratio into x + 3, whose limit as x approaches 3 is 6.

  12. rationalizing

    Multiplying top and bottom by the conjugate of a root expression so the root clears.

    Loses the mark: “square the top and bottom”. Squaring changes the value of the fraction; multiplying by the conjugate over itself does not.

    Example: Rationalizing the numerator of the square-root expression clears the 0/0 and shows the limit is 1/4.

  13. sin x over x approaches 1

    lim⁡x→0sin⁡xx=1\lim_{x \to 0} \frac{\sin x}{x} = 1

    As x approaches 0 (in radians), sin x divided by x approaches 1.

    Loses the mark: “sin x over x equals 1”. It is a limit as x approaches 0, not an equation true for every x.

    Example: Writing sin(5x)/x as 5 times sin(5x)/(5x) lets us use sin x over x approaches 1, so the limit is 5.

  14. squeeze theorem

    g(x)≤f(x)≤h(x)g(x) \le f(x) \le h(x)

    If g(x) ≤ f(x) ≤ h(x) near a and g, h approach L, then f approaches L.

    Loses the mark: “one bound is enough”. A single bound only limits one side; f could still settle anywhere on the other side.

    Example: Since the vibration's height stays between -x² and x², and both bounds approach 0, the squeeze theorem gives a limit of 0 at x = 0.

  15. bounding functions

    The functions below and above f near a; both must approach the same value there.

    Loses the mark: “trapped between two numbers”. Fixed numbers bound f but need not close in; the bounds must share a limit at a.

    Example: We chose -|x| and |x| as the bounding functions because both approach 0 as x approaches 0.

  16. bounded function

    A function whose outputs stay between two fixed numbers.

    Loses the mark: “bounded so it goes to zero”. Being bounded does not make a factor vanish; the product tends to 0 only if the other factor does.

    Example: Because cos(1/x) is a bounded function and x approaches 0, the product x·cos(1/x) is squeezed to 0.

  17. continuous at a point

    f(a) is defined, the limit as x approaches a exists, and that limit equals f(a).

    Loses the mark: “defined so it is continuous”. A value at a is only the first of three conditions.

    Example: The heater's power is continuous at a point t = 5 because P(5) = 60, the limit as t approaches 5 is 60, and the two are equal.

  18. removable discontinuity

    A break where the limit exists but f(a) is missing or different from it.

    Loses the mark: “removable because f(a) is undefined”. Removable depends on the limit existing, not just on the value being missing.

    Example: The sensor log has a removable discontinuity at t = 2: the readings approach 6 from both sides but one value was recorded as 9.

  19. jump discontinuity

    A break where both one-sided limits exist and are finite but are different numbers.

    Loses the mark: “the limit is the average of the two sides”. When the sides differ, the two-sided limit does not exist.

    Example: The postage cost has a jump discontinuity at 1 ounce, since the left-hand limit is 0.68 dollars and the right-hand limit is 0.92 dollars.

  20. infinite discontinuity

    A break where a one-sided limit is infinite, giving a vertical asymptote.

    Loses the mark: “a jump to infinity”. A jump needs two finite one-sided limits; an unbounded side makes the break infinite.

    Example: The lens formula has an infinite discontinuity at the focal length, where the image distance grows without bound.

  21. continuous on an interval

    Continuous at every point of the interval, using one-sided limits at included endpoints.

    Loses the mark: “drawn without lifting the pencil”. An informal picture; justify with continuity at every point of the interval.

    Example: The rational model is continuous on an interval [0, 4] because its denominator is never zero there.

  22. redefine f(a) as the limit

    Redefining the value at a to equal the limit there, so the function becomes continuous.

    Loses the mark: “cancel the factor and the function is the same”. The canceled form agrees except at a; f(a) must be defined as the limit.

    Example: To make the drip-rate model continuous, we redefine f(a) as the limit, setting f(1) = 2.

  23. vertical asymptote

    x=ax = a

    A line x = a where f(x) grows without bound as x approaches a.

    Loses the mark: “every zero of the denominator is an asymptote”. If the zero cancels with the numerator, the graph has a hole there instead.

    Example: As the speed approaches the sound barrier the model's drag grows without bound, so x = 343 is a vertical asymptote.

  24. infinite limit

    lim⁡x→a+f(x)=∞\lim_{x \to a^+} f(x) = \infty

    A limit written ∞ or -∞ to record that outputs grow without bound.

    Loses the mark: “the limit is infinity so it exists”. Writing ∞ describes how the limit fails to exist; it is not a real-number value.

    Example: As the gap x shrinks to 0 from the right, the field strength has an infinite limit of ∞.

  25. limit at infinity

    lim⁡x→∞f(x)\lim_{x \to \infty} f(x)

    The value f(x) approaches as x increases or decreases without bound.

    Loses the mark: “plug in infinity”. Infinity is not a number; compare growth of the terms instead.

    Example: The limit at infinity of the caffeine model is 0, so the amount in the blood fades toward nothing over time.

  26. horizontal asymptote

    y=Ly = L

    A line y = L where L is the finite limit of f(x) as x approaches ∞.

    Loses the mark: “the graph never crosses a horizontal asymptote”. An asymptote describes end behavior; the graph may cross it at finite x.

    Example: The coffee's temperature model has a horizontal asymptote at y = 21, the room temperature it settles toward.

  27. leading term

    The highest-degree term of a polynomial, which decides its behavior at infinity.

    Loses the mark: “the ratio of leading coefficients is always the answer”. That ratio is the limit only when the degrees are equal.

    Example: Dividing by the leading term x² in top and bottom shows the cost-per-unit model approaches 3 as output grows.

  28. Intermediate Value Theorem

    Continuous f on [a, b] takes every value k between f(a) and f(b).

    Loses the mark: “it changes sign so it has a root”. The sign change alone is not enough; continuity on the closed interval must be stated.

    Example: The pond temperature is continuous on [0, 6] with readings 4 and 10 degrees, so by the Intermediate Value Theorem it was 7 degrees at some time in that interval.

  29. continuous on the closed interval

    The hypothesis that f has no breaks anywhere on [a, b], endpoints included.

    Loses the mark: “the function is continuous so the IVT applies”. Name the interval: the hypothesis is continuity on the closed interval [a, b].

    Example: Because the altitude function is continuous on the closed interval [0, 10], the IVT applies to it.

  30. between f(a) and f(b)

    The IVT check that the target k lies between the outputs f(a) and f(b).

    Loses the mark: “k is between a and b”. The target value is compared with the outputs at the endpoints, not the inputs.

    Example: The target 50 kilograms is between f(a) and f(b), 42 and 61, so the conditions of the theorem are met.

  31. estimate of a limit

    The height outputs appear to approach in a table or graph, before algebra confirms it.

    Loses the mark: “the closest row is the limit”. The nearest row only approximates; read the trend the rows close in on.

    Example: From the rows 2.99 and 3.01, our estimate of a limit at x = 2 is 3, which the factored formula confirms.

  32. nonremovable discontinuity

    A jump or infinite break, which no single value at the point can repair.

    Loses the mark: “redefine the point to fix the jump”. A jump's one-sided limits differ, so no one value meets both.

    Example: The parking charge has a nonremovable discontinuity at one hour: the one-sided limits are 2 and 4.