AP Calculus BC, Unit 10
Exam words: Infinite Sequences and Series
The 53 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.
Study these words as a deck
Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.
The words
sequence
An ordered list of numbers , different from the series that adds them.
Loses the mark: “the series converges because the sequence converges”. Terms approaching a limit, even 0, does not make their total finite.
Example: The sequence converges to 0, yet the series of its terms diverges.
infinite series
The sum of a sequence's terms, defined as the limit of partial sums.
Loses the mark: “the sum is the limit of the terms”. The limit of the terms is where single pieces go; the sum is the limit of the running totals.
Example: The infinite series has partial sums 0.3, 0.33, 0.333, which approach .
nth term
The general term of a series, the number added at position n.
Loses the mark: “the nth term is the total so far”. The total after n terms is the partial sum ; the term is only the last piece added.
Example: Since , the nth term is .
partial sum
The total of a series' first n terms; these sums decide convergence.
Loses the mark: “bounded partial sums so it converges”. Partial sums can stay bounded yet never settle, as with .
Example: The fifth partial sum of is , and the partial sums approach 1.
convergent series
A series whose partial sums approach a finite limit S, which is the series' sum.
Loses the mark: “approaches its sum but never reaches it”. The partial sums approach S; the sum of the series is S exactly.
Example: Because , the series converges, and its sum is exactly 1.
divergent series
A series whose partial sums do not approach a finite limit; it has no sum.
Loses the mark: “diverges because the terms stay large”. A series can diverge while its terms shrink to 0, like the harmonic series.
Example: The partial sums of alternate between 1 and 0, so the series diverges even though they stay bounded.
geometric series
Each term is the previous one times a fixed r; converges exactly when .
Loses the mark: “a over 1 minus r for any ratio”. The formula holds only when ; for the series diverges.
Example: The geometric series converges because , and its sum is 9.
common ratio
The fixed number r each geometric series term is multiplied by to give the next.
Loses the mark: “the ratio is the base of the power”. In the ratio is , found by dividing neighboring terms, not by reading one base.
Example: In the common ratio is , so the series converges to .
first term
The first term the series contains, the in ; use the starting index.
Loses the mark: “the first term is the coefficient in front”. In the first term is , not 5.
Example: For the first term is , so the sum is .
sum of a geometric series
, the value of a convergent geometric series with first term a, ratio r.
Loses the mark: “the sum is approximately a over 1 minus r”. For the sum equals exactly; only the partial sums approach it.
Example: A ball dropped from 2 m that rebounds to 60% of each height falls a total of m, the sum of a geometric series.
nth-term test
If or does not exist, diverges; if , no conclusion.
Loses the mark: “the terms go to zero so the series converges”. Terms tending to 0 is necessary, not sufficient; the harmonic series is a counterexample.
Example: Since , the series diverges by the nth-term test.
inconclusive
Said of a test giving no verdict, so another test is needed.
Loses the mark: “the test fails so the series diverges”. An inconclusive test says nothing either way; it does not mean divergence.
Example: Here , so the nth-term test is inconclusive, and the p-series test is used instead.
necessary but not sufficient
Terms approaching 0 is required for convergence, but does not guarantee it.
Loses the mark: “terms going to 0 is enough for convergence”. The harmonic series has terms going to 0 and still diverges.
Example: Terms approaching 0 is necessary but not sufficient: while diverges.
integral test
If with f positive, continuous, decreasing, then and behave alike.
Loses the mark: “the series equals the integral”. The test transfers only the verdict; the sum and the integral's value are generally different.
Example: Since is positive, continuous and decreasing and its integral from 1 to infinity is , the series converges by the integral test.
positive, continuous and decreasing
The three conditions on f, at least for large x, checked before the integral test.
Loses the mark: “the terms get smaller”. Decreasing must be shown, for example with a negative derivative, together with positive and continuous.
Example: Since , the function is positive, continuous and decreasing on .
p-series
A series ; it converges when and diverges when .
Loses the mark: “converges because p is positive”. A p-series needs ; for it diverges.
Example: is a p-series with , so it converges.
harmonic series
The p-series with , ; its terms go to 0 but it diverges.
Loses the mark: “the harmonic series converges”. Its partial sums grow like , without bound.
Example: The harmonic series diverges, so a stack of blocks with overhangs can reach out as far as you like.
direct comparison test
For : if converges, so does ; if diverges, so does .
Loses the mark: “smaller than a divergent series so it diverges”. Being below a divergent series gives no verdict; only above divergent or below convergent decides.
Example: Since and converges, converges by the direct comparison test.
limit comparison test
For positive terms, if is finite and positive, and behave alike.
Loses the mark: “the limit is less than 1 so it converges”. In limit comparison any finite positive limit means the same fate; its size does not decide.
Example: With , , a finite positive number, so diverges by the limit comparison test.
comparison series
A simpler series of known behavior, built from the dominant parts of the terms.
Loses the mark: “compare with any series that looks similar”. The partner needs known behavior and the right inequality or limit; a poor choice gives no verdict.
Example: For the comparison series is , from the dominant parts .
finite positive limit
The outcome that the limit comparison test needs.
Loses the mark: “the limit is 0 so they behave the same”. A limit of 0 only shows is much smaller; the two series need not share a verdict.
Example: The ratio of the terms tends to 3, a finite positive limit, so both series share the same behavior.
alternating series
A series whose terms switch sign every time, written or with every .
Loses the mark: “alternating signs so it converges”. Alternating signs alone guarantee nothing; diverges.
Example: The alternating series converges to .
alternating series test
An alternating series converges if is eventually decreasing and .
Loses the mark: “fails the alternating series test so it diverges”. When its conditions fail the test is silent; divergence needs a different test.
Example: Here is positive, decreasing and has limit 0, so the series converges by the alternating series test.
decreasing to zero
The two alternating series test checks: sizes are eventually non-increasing, and .
Loses the mark: “the terms get closer to zero”. Approaching 0 is only one condition; decreasing must also be shown, for example with a negative derivative.
Example: The sizes are decreasing to zero for , since their derivative is negative there and their limit is 0.
alternating series error bound
When the alternating series test applies, is at most the first omitted term.
Loses the mark: “the error is less than the last term used”. The bound is the first omitted term, , not .
Example: By the alternating series error bound, of is within of the sum.
first omitted term
The first term left out of a partial sum; it bounds the alternating series error.
Loses the mark: “the partial sum is always too small”. If the first omitted term is negative, the partial sum is above the sum, so it is too large.
Example: The first omitted term, , is negative, so of is larger than the sum.
ratio test
With : converges absolutely, diverges, inconclusive.
Loses the mark: “L equals 1 so the series converges”. A limit of 1 gives no information; convergent and divergent p-series both give L = 1.
Example: For , , so the series converges absolutely by the ratio test.
ratio limit
The value , acting like a geometric common ratio far out in the tail.
Loses the mark: “each ratio is less than 1 so it converges”. Only the limit decides; ratios below 1 can still approach 1, as for .
Example: For the ratio limit is , so the tail shrinks roughly like a geometric series with ratio .
factorial
The product , with ; in a ratio, simplifies to .
Loses the mark: “(n + 1)! over n! is 1”. Neighboring factorials differ by the factor n + 1, which grows without bound.
Example: Cancelling the factorial, , so has ratio limit and diverges.
absolutely convergent
A series whose converges; it also converges, and rearranging keeps the sum.
Loses the mark: “it converges so it converges absolutely”. A convergent series can still have divergent; absolute convergence is tested separately.
Example: Since is a convergent p-series, the series converges absolutely.
conditionally convergent
A series that converges while its absolute values series diverges, such as .
Loses the mark: “the absolute series diverges so the series diverges”. The signed series can still converge; that case is conditional convergence.
Example: The series converges by the alternating series test, but diverges, so it is conditionally convergent.
series of absolute values
The series with every sign dropped; test it first to settle absolute convergence.
Loses the mark: “take the absolute value of the sum”. is one number; the test needs the sum of the absolute values.
Example: The series of absolute values is , a convergent p-series, so the original series converges absolutely.
absolute convergence implies convergence
If converges then converges, so test absolute values for mixed signs.
Loses the mark: “convergence implies absolute convergence”. The converse is false; converges but not absolutely.
Example: Since and converges, absolute convergence implies convergence of .
rearrangement
Adding a series' terms in a different order; this keeps an absolutely convergent sum only.
Loses the mark: “reordering never changes the sum”. A conditionally convergent series can be rearranged to add up to any number you choose.
Example: Any rearrangement of has the same sum, because the series converges absolutely.
Taylor polynomial
The polynomial , which matches f and its first n derivatives at the center a.
Loses the mark: “the coefficient is the derivative”. Each derivative value is divided by ; without it the polynomial's derivatives do not match.
Example: The third-degree Taylor polynomial for about 0 gives .
center
The input about which a Taylor series is built, in powers of .
Loses the mark: “powers of x when centered at 2”. About the terms are powers of .
Example: With the center at , the polynomial for estimates .
degree of a Taylor polynomial
The highest power of the polynomial contains, even if some terms are zero.
Loses the mark: “the degree is the number of terms”. for has degree 3 but only two nonzero terms.
Example: The degree of a Taylor polynomial counts the top power, so for has degree 3 with only two terms.
Taylor coefficient
The number multiplying : the kth derivative at the center divided by k factorial.
Loses the mark: “the coefficient of x squared is f double prime of a”. It is ; the factorial cannot be dropped.
Example: With from the table, the Taylor coefficient of is .
Maclaurin polynomial
A Taylor polynomial whose center is 0, written in powers of x.
Loses the mark: “every Taylor polynomial is a Maclaurin polynomial”. Only those centered at 0 are; others use powers of .
Example: The second-degree Maclaurin polynomial of is , which gives .
Lagrange error bound
, where M is at least everywhere between a and x.
Loses the mark: “the error is the last term used”. The bound is built from the first term left out, with M in place of the derivative.
Example: For of at , the Lagrange error bound with is .
bound on the next derivative
A justified bound M on between the center and x, for the Lagrange bound.
Loses the mark: “the next derivative evaluated at the center”. M must hold on the whole interval from a to x; the value at a alone is not enough.
Example: Since on , 2 is a bound on the next derivative for of .
Taylor remainder
The actual error of a Taylor estimate, not just a bound on it.
Loses the mark: “the error bound is the error”. The bound is only a guaranteed maximum; the remainder is usually smaller.
Example: The Taylor remainder for with is under 0.0001, so the estimate 0.98 is good to three decimal places.
power series
A series in powers of , defining a function wherever it converges.
Loses the mark: “a power series converges for every x”. Most converge only on an interval around the center.
Example: The power series is centered at 3 and converges for .
radius of convergence
The number R where a power series converges absolutely for and diverges for .
Loses the mark: “the radius is the ratio limit”. Set the ratio limit, which contains , less than 1 and solve; R comes from that inequality.
Example: The ratio test gives , so the radius of convergence is 4 and the series is centered at .
interval of convergence
All x where a power series converges: plus any endpoints that converge.
Loses the mark: “the ratio test settles the endpoints”. At an endpoint the ratio limit equals 1, so each endpoint needs its own test.
Example: For the interval of convergence is : at the alternating series test applies, and at it is the harmonic series.
testing the endpoints
Substituting each endpoint into the power series and testing the resulting number series.
Loses the mark: “the endpoints are included”. An endpoint is included only if its own series is shown to converge.
Example: Testing the endpoints of , both and give series that converge absolutely by comparison with .
Taylor series
The infinite series , the limit of the Taylor polynomials of f about a.
Loses the mark: “equals f wherever f is defined”. It equals f only on its interval of convergence; exists at , but its series diverges there.
Example: The Taylor series for about 1 is for .
Maclaurin series
A Taylor series centered at 0, such as those for , , and .
Loses the mark: “sine has the even powers”. Sine is odd and uses odd powers; cosine uses even powers starting at 1.
Example: Recognizing the Maclaurin series for at gives .
represents the function
Said of a power series whose sum equals f(x) at every x of an interval.
Loses the mark: “the arctan series works for every x”. The series for converges only for .
Example: The series represents the function only for .
substitution into a known series
Replacing x in a known series by an expression such as .
Loses the mark: “(-x^2)^n equals -x^(2n)”. The minus sign is raised to the power too: .
Example: Substitution into a known series gives for every x.
term-by-term differentiation
Differentiating a power series term by term; the radius is unchanged but endpoints need rechecking.
Loses the mark: “the new series keeps the old interval”. The radius is kept, but endpoint behavior can change and must be tested again.
Example: Term-by-term differentiation of gives for .
term-by-term integration
Integrating a power series term by term, adding a constant from the center; radius unchanged.
Loses the mark: “no constant when integrating a series”. Each antiderivative needs C; set it from the known value at the center, such as .
Example: Term-by-term integration of from 0 to x gives .
multiplying by a power of x
Multiplying every term by , raising each exponent by k; coefficients and radius stay unchanged.
Loses the mark: “multiply the denominators by x too”. Only the powers of x change; each coefficient, denominator included, stays the same.
Example: Multiplying by a power of x, , so the coefficient of is .