marlio

AP Calculus BC, Unit 10

Exam words: Infinite Sequences and Series

The 53 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.

Study these words as a deck

Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.

The words

  1. sequence

    {an}\{a_n\}

    An ordered list of numbers a1,a2,a3,…a_1, a_2, a_3, \dots, different from the series that adds them.

    Loses the mark: “the series converges because the sequence converges”. Terms approaching a limit, even 0, does not make their total finite.

    Example: The sequence an=1na_n = \frac{1}{n} converges to 0, yet the series of its terms diverges.

  2. infinite series

    ∑n=1∞an\sum_{n=1}^{\infty} a_n

    The sum ∑n=1∞an\sum_{n=1}^{\infty} a_n of a sequence's terms, defined as the limit of partial sums.

    Loses the mark: “the sum is the limit of the terms”. The limit of the terms is where single pieces go; the sum is the limit of the running totals.

    Example: The infinite series ∑n=1∞310n\sum_{n=1}^\infty \frac{3}{10^n} has partial sums 0.3, 0.33, 0.333, which approach 13\frac13.

  3. nth term

    ana_n

    The general term ana_n of a series, the number added at position n.

    Loses the mark: “the nth term is the total so far”. The total after n terms is the partial sum SnS_n; the term ana_n is only the last piece added.

    Example: Since Sn=nn+1S_n = \frac{n}{n + 1}, the nth term is an=Sn−Sn−1=1n(n+1)a_n = S_n - S_{n-1} = \frac{1}{n(n + 1)}.

  4. partial sum

    Sn=∑k=1nakS_n = \sum_{k=1}^{n} a_k

    The total Sn=a1+a2+⋯+anS_n = a_1 + a_2 + \dots + a_n of a series' first n terms; these sums decide convergence.

    Loses the mark: “bounded partial sums so it converges”. Partial sums can stay bounded yet never settle, as with 1−1+1−⋯1 - 1 + 1 - \cdots.

    Example: The fifth partial sum of ∑n=1∞12n\sum_{n=1}^\infty \frac{1}{2^n} is S5=3132S_5 = \frac{31}{32}, and the partial sums approach 1.

  5. convergent series

    ∑an=lim⁡n→∞Sn\sum a_n = \lim_{n \to \infty} S_n

    A series whose partial sums approach a finite limit S, which is the series' sum.

    Loses the mark: “approaches its sum but never reaches it”. The partial sums approach S; the sum of the series is S exactly.

    Example: Because Sn=1−1n+1→1S_n = 1 - \frac{1}{n + 1} \to 1, the series converges, and its sum is exactly 1.

  6. divergent series

    A series whose partial sums do not approach a finite limit; it has no sum.

    Loses the mark: “diverges because the terms stay large”. A series can diverge while its terms shrink to 0, like the harmonic series.

    Example: The partial sums of 1−1+1−1+⋯1 - 1 + 1 - 1 + \cdots alternate between 1 and 0, so the series diverges even though they stay bounded.

  7. geometric series

    ∑n=0∞arn\sum_{n=0}^{\infty} ar^n

    Each term is the previous one times a fixed r; converges exactly when ∣r∣<1|r| < 1.

    Loses the mark: “a over 1 minus r for any ratio”. The formula holds only when ∣r∣<1|r| < 1; for ∣r∣≥1|r| \ge 1 the series diverges.

    Example: The geometric series ∑n=0∞6(13)n\sum_{n=0}^\infty 6\left(\frac13\right)^n converges because ∣13∣<1\left|\frac13\right| < 1, and its sum is 9.

  8. common ratio

    rr

    The fixed number r each geometric series term is multiplied by to give the next.

    Loses the mark: “the ratio is the base of the power”. In ∑2n3n+1\sum \frac{2^n}{3^{n+1}} the ratio is 23\frac23, found by dividing neighboring terms, not by reading one base.

    Example: In 8−4+2−1+⋯8 - 4 + 2 - 1 + \cdots the common ratio is −12-\frac12, so the series converges to 81+12=163\frac{8}{1 + \frac12} = \frac{16}{3}.

  9. first term

    aa

    The first term the series contains, the aa in a1−r\frac{a}{1 - r}; use the starting index.

    Loses the mark: “the first term is the coefficient in front”. In ∑n=1∞5(12)n\sum_{n=1}^\infty 5\left(\frac12\right)^n the first term is 52\frac52, not 5.

    Example: For ∑n=2∞(13)n\sum_{n=2}^\infty \left(\frac13\right)^n the first term is 19\frac19, so the sum is 1/91−1/3=16\frac{1/9}{1 - 1/3} = \frac16.

  10. sum of a geometric series

    S=a1−rS = \dfrac{a}{1 - r}

    a1−r\frac{a}{1 - r}, the value of a convergent geometric series with first term a, ratio r.

    Loses the mark: “the sum is approximately a over 1 minus r”. For ∣r∣<1|r| < 1 the sum equals a1−r\frac{a}{1 - r} exactly; only the partial sums approach it.

    Example: A ball dropped from 2 m that rebounds to 60% of each height falls a total of 21−0.6=5\frac{2}{1 - 0.6} = 5 m, the sum of a geometric series.

  11. nth-term test

    If lim⁡an≠0\lim a_n \ne 0 or does not exist, ∑an\sum a_n diverges; if lim⁡an=0\lim a_n = 0, no conclusion.

    Loses the mark: “the terms go to zero so the series converges”. Terms tending to 0 is necessary, not sufficient; the harmonic series is a counterexample.

    Example: Since lim⁡n→∞2n3n+1=23≠0\lim_{n \to \infty} \frac{2n}{3n + 1} = \frac23 \ne 0, the series diverges by the nth-term test.

  12. inconclusive

    Said of a test giving no verdict, so another test is needed.

    Loses the mark: “the test fails so the series diverges”. An inconclusive test says nothing either way; it does not mean divergence.

    Example: Here lim⁡1n=0\lim \frac{1}{\sqrt n} = 0, so the nth-term test is inconclusive, and the p-series test is used instead.

  13. necessary but not sufficient

    Terms approaching 0 is required for convergence, but does not guarantee it.

    Loses the mark: “terms going to 0 is enough for convergence”. The harmonic series has terms going to 0 and still diverges.

    Example: Terms approaching 0 is necessary but not sufficient: 1n→0\frac1n \to 0 while ∑1n\sum \frac1n diverges.

  14. integral test

    If an=f(n)a_n = f(n) with f positive, continuous, decreasing, then ∑an\sum a_n and ∫1∞f(x) dx\int_1^\infty f(x)\,dx behave alike.

    Loses the mark: “the series equals the integral”. The test transfers only the verdict; the sum and the integral's value are generally different.

    Example: Since f(x)=1x2+1f(x) = \frac{1}{x^2 + 1} is positive, continuous and decreasing and its integral from 1 to infinity is π4\frac{\pi}{4}, the series converges by the integral test.

  15. positive, continuous and decreasing

    The three conditions on f, at least for large x, checked before the integral test.

    Loses the mark: “the terms get smaller”. Decreasing must be shown, for example with a negative derivative, together with positive and continuous.

    Example: Since f′(x)=−1x2<0f'(x) = -\frac{1}{x^2} < 0, the function f(x)=1xf(x) = \frac{1}{x} is positive, continuous and decreasing on [1,∞)[1, \infty).

  16. p-series

    ∑n=1∞1np\sum_{n=1}^{\infty} \dfrac{1}{n^p}

    A series ∑1np\sum \frac{1}{n^p}; it converges when p>1p > 1 and diverges when p≤1p \le 1.

    Loses the mark: “converges because p is positive”. A p-series needs p>1p > 1; for 0<p≤10 < p \le 1 it diverges.

    Example: ∑1n1.01\sum \frac{1}{n^{1.01}} is a p-series with p=1.01>1p = 1.01 > 1, so it converges.

  17. harmonic series

    ∑n=1∞1n\sum_{n=1}^{\infty} \dfrac{1}{n}

    The p-series with p=1p = 1, ∑1n\sum \frac1n; its terms go to 0 but it diverges.

    Loses the mark: “the harmonic series converges”. Its partial sums grow like ln⁡n\ln n, without bound.

    Example: The harmonic series diverges, so a stack of blocks with overhangs 12,14,16,…\frac12, \frac14, \frac16, \dots can reach out as far as you like.

  18. direct comparison test

    For 0≤an≤bn0 \le a_n \le b_n: if ∑bn\sum b_n converges, so does ∑an\sum a_n; if ∑an\sum a_n diverges, so does ∑bn\sum b_n.

    Loses the mark: “smaller than a divergent series so it diverges”. Being below a divergent series gives no verdict; only above divergent or below convergent decides.

    Example: Since 0<1n2+5<1n20 < \frac{1}{n^2 + 5} < \frac{1}{n^2} and ∑1n2\sum \frac{1}{n^2} converges, ∑1n2+5\sum \frac{1}{n^2 + 5} converges by the direct comparison test.

  19. limit comparison test

    For positive terms, if lim⁡anbn\lim \frac{a_n}{b_n} is finite and positive, ∑an\sum a_n and ∑bn\sum b_n behave alike.

    Loses the mark: “the limit is less than 1 so it converges”. In limit comparison any finite positive limit means the same fate; its size does not decide.

    Example: With bn=1nb_n = \frac1n, lim⁡n/(n2+3)1/n=1\lim \frac{n/(n^2 + 3)}{1/n} = 1, a finite positive number, so ∑nn2+3\sum \frac{n}{n^2 + 3} diverges by the limit comparison test.

  20. comparison series

    A simpler series ∑bn\sum b_n of known behavior, built from the dominant parts of the terms.

    Loses the mark: “compare with any series that looks similar”. The partner needs known behavior and the right inequality or limit; a poor choice gives no verdict.

    Example: For 3n+1n3−2\frac{3n + 1}{n^3 - 2} the comparison series is ∑1n2\sum \frac{1}{n^2}, from the dominant parts 3nn3\frac{3n}{n^3}.

  21. finite positive limit

    0<L<∞0 < L < \infty

    The outcome 0<L<∞0 < L < \infty that the limit comparison test needs.

    Loses the mark: “the limit is 0 so they behave the same”. A limit of 0 only shows ana_n is much smaller; the two series need not share a verdict.

    Example: The ratio of the terms tends to 3, a finite positive limit, so both series share the same behavior.

  22. alternating series

    ∑(−1)nbn, bn>0\sum (-1)^n b_n,\ b_n > 0

    A series whose terms switch sign every time, written ∑(−1)nbn\sum (-1)^n b_n or ∑(−1)n+1bn\sum (-1)^{n+1} b_n with every bn>0b_n > 0.

    Loses the mark: “alternating signs so it converges”. Alternating signs alone guarantee nothing; ∑(−1)n\sum (-1)^n diverges.

    Example: The alternating series 1−12+13−14+⋯1 - \frac12 + \frac13 - \frac14 + \cdots converges to ln⁡2\ln 2.

  23. alternating series test

    An alternating series ∑(−1)nbn\sum (-1)^n b_n converges if bnb_n is eventually decreasing and lim⁡bn=0\lim b_n = 0.

    Loses the mark: “fails the alternating series test so it diverges”. When its conditions fail the test is silent; divergence needs a different test.

    Example: Here bn=1nb_n = \frac{1}{\sqrt n} is positive, decreasing and has limit 0, so the series converges by the alternating series test.

  24. decreasing to zero

    The two alternating series test checks: sizes bnb_n are eventually non-increasing, and lim⁡bn=0\lim b_n = 0.

    Loses the mark: “the terms get closer to zero”. Approaching 0 is only one condition; decreasing must also be shown, for example with a negative derivative.

    Example: The sizes ln⁡nn\frac{\ln n}{n} are decreasing to zero for n≥3n \ge 3, since their derivative is negative there and their limit is 0.

  25. alternating series error bound

    ∣S−Sn∣≤bn+1|S - S_n| \le b_{n+1}

    When the alternating series test applies, ∣S−Sn∣|S - S_n| is at most the first omitted term.

    Loses the mark: “the error is less than the last term used”. The bound is the first omitted term, bn+1b_{n+1}, not bnb_n.

    Example: By the alternating series error bound, S4S_4 of ∑(−1)n+1n2\sum \frac{(-1)^{n+1}}{n^2} is within 125=0.04\frac{1}{25} = 0.04 of the sum.

  26. first omitted term

    The first term left out of a partial sum; it bounds the alternating series error.

    Loses the mark: “the partial sum is always too small”. If the first omitted term is negative, the partial sum is above the sum, so it is too large.

    Example: The first omitted term, −136-\frac{1}{36}, is negative, so S5S_5 of ∑(−1)n+1n2\sum \frac{(-1)^{n+1}}{n^2} is larger than the sum.

  27. ratio test

    With L=lim⁡∣an+1an∣L = \lim \left|\frac{a_{n+1}}{a_n}\right|: L<1L < 1 converges absolutely, L>1L > 1 diverges, L=1L = 1 inconclusive.

    Loses the mark: “L equals 1 so the series converges”. A limit of 1 gives no information; convergent and divergent p-series both give L = 1.

    Example: For ∑5nn!\sum \frac{5^n}{n!}, ∣an+1an∣=5n+1→0<1\left|\frac{a_{n+1}}{a_n}\right| = \frac{5}{n + 1} \to 0 < 1, so the series converges absolutely by the ratio test.

  28. ratio limit

    L=lim⁡n→∞∣an+1an∣L = \lim_{n \to \infty} \left|\dfrac{a_{n+1}}{a_n}\right|

    The value L=lim⁡n→∞∣an+1an∣L = \lim_{n \to \infty} \left|\frac{a_{n+1}}{a_n}\right|, acting like a geometric common ratio far out in the tail.

    Loses the mark: “each ratio is less than 1 so it converges”. Only the limit decides; ratios below 1 can still approach 1, as for 1n\frac1n.

    Example: For ∑n3n\sum \frac{n}{3^n} the ratio limit is 13\frac13, so the tail shrinks roughly like a geometric series with ratio 13\frac13.

  29. factorial

    n!n!

    The product n!=1⋅2⋯nn! = 1 \cdot 2 \cdots n, with 0!=10! = 1; in a ratio, (n+1)!n!\frac{(n + 1)!}{n!} simplifies to n+1n + 1.

    Loses the mark: “(n + 1)! over n! is 1”. Neighboring factorials differ by the factor n + 1, which grows without bound.

    Example: Cancelling the factorial, (n+1)!n!=n+1\frac{(n + 1)!}{n!} = n + 1, so ∑n!2n\sum \frac{n!}{2^n} has ratio limit ∞\infty and diverges.

  30. absolutely convergent

    A series ∑an\sum a_n whose ∑∣an∣\sum |a_n| converges; it also converges, and rearranging keeps the sum.

    Loses the mark: “it converges so it converges absolutely”. A convergent series can still have ∑∣an∣\sum |a_n| divergent; absolute convergence is tested separately.

    Example: Since ∑∣(−1)nn2∣=∑1n2\sum \left|\frac{(-1)^n}{n^2}\right| = \sum \frac{1}{n^2} is a convergent p-series, the series converges absolutely.

  31. conditionally convergent

    A series that converges while its absolute values series diverges, such as ∑(−1)n+1n\sum \frac{(-1)^{n+1}}{n}.

    Loses the mark: “the absolute series diverges so the series diverges”. The signed series can still converge; that case is conditional convergence.

    Example: The series ∑(−1)nn\sum \frac{(-1)^n}{\sqrt n} converges by the alternating series test, but ∑1n\sum \frac{1}{\sqrt n} diverges, so it is conditionally convergent.

  32. series of absolute values

    ∑∣an∣\sum |a_n|

    The series ∑∣an∣\sum |a_n| with every sign dropped; test it first to settle absolute convergence.

    Loses the mark: “take the absolute value of the sum”. ∣∑an∣\left|\sum a_n\right| is one number; the test needs the sum of the absolute values.

    Example: The series of absolute values is ∑1n3\sum \frac{1}{n^3}, a convergent p-series, so the original series converges absolutely.

  33. absolute convergence implies convergence

    If ∑∣an∣\sum |a_n| converges then ∑an\sum a_n converges, so test absolute values for mixed signs.

    Loses the mark: “convergence implies absolute convergence”. The converse is false; ∑(−1)nn\sum \frac{(-1)^n}{n} converges but not absolutely.

    Example: Since ∣sin⁡n∣n2≤1n2\frac{|\sin n|}{n^2} \le \frac{1}{n^2} and ∑1n2\sum \frac{1}{n^2} converges, absolute convergence implies convergence of ∑sin⁡nn2\sum \frac{\sin n}{n^2}.

  34. rearrangement

    Adding a series' terms in a different order; this keeps an absolutely convergent sum only.

    Loses the mark: “reordering never changes the sum”. A conditionally convergent series can be rearranged to add up to any number you choose.

    Example: Any rearrangement of ∑(−1)n2n\sum \frac{(-1)^n}{2^n} has the same sum, because the series converges absolutely.

  35. Taylor polynomial

    Pn(x)=∑k=0nf(k)(a)k!(x−a)kP_n(x) = \sum_{k=0}^{n} \dfrac{f^{(k)}(a)}{k!}(x - a)^k

    The polynomial Pn(x)=∑k=0nf(k)(a)k!(x−a)kP_n(x) = \sum_{k=0}^n \frac{f^{(k)}(a)}{k!}(x - a)^k, which matches f and its first n derivatives at the center a.

    Loses the mark: “the coefficient is the derivative”. Each derivative value is divided by k!k!; without it the polynomial's derivatives do not match.

    Example: The third-degree Taylor polynomial for exe^x about 0 gives e0.1≈1+0.1+0.012+0.0016≈1.10517e^{0.1} \approx 1 + 0.1 + \frac{0.01}{2} + \frac{0.001}{6} \approx 1.10517.

  36. center

    x=ax = a

    The input x=ax = a about which a Taylor series is built, in powers of (x−a)(x - a).

    Loses the mark: “powers of x when centered at 2”. About a=2a = 2 the terms are powers of (x−2)(x - 2).

    Example: With the center at x=1x = 1, the polynomial (x−1)−(x−1)22(x - 1) - \frac{(x - 1)^2}{2} for ln⁡x\ln x estimates ln⁡1.2≈0.18\ln 1.2 \approx 0.18.

  37. degree of a Taylor polynomial

    The highest power of (x−a)(x - a) the polynomial contains, even if some terms are zero.

    Loses the mark: “the degree is the number of terms”. x−x36x - \frac{x^3}{6} for sin⁡x\sin x has degree 3 but only two nonzero terms.

    Example: The degree of a Taylor polynomial counts the top power, so x−x36x - \frac{x^3}{6} for sin⁡x\sin x has degree 3 with only two terms.

  38. Taylor coefficient

    f(k)(a)k!\dfrac{f^{(k)}(a)}{k!}

    The number f(k)(a)k!\frac{f^{(k)}(a)}{k!} multiplying (x−a)k(x - a)^k: the kth derivative at the center divided by k factorial.

    Loses the mark: “the coefficient of x squared is f double prime of a”. It is f′′(a)2!\frac{f''(a)}{2!}; the factorial cannot be dropped.

    Example: With f′′′(2)=12f'''(2) = 12 from the table, the Taylor coefficient of (x−2)3(x - 2)^3 is 123!=2\frac{12}{3!} = 2.

  39. Maclaurin polynomial

    A Taylor polynomial whose center is 0, written in powers of x.

    Loses the mark: “every Taylor polynomial is a Maclaurin polynomial”. Only those centered at 0 are; others use powers of (x−a)(x - a).

    Example: The second-degree Maclaurin polynomial of cos⁡x\cos x is 1−x221 - \frac{x^2}{2}, which gives cos⁡0.1≈0.995\cos 0.1 \approx 0.995.

  40. Lagrange error bound

    ∣Rn(x)∣≤M(n+1)!∣x−a∣n+1|R_n(x)| \le \dfrac{M}{(n+1)!}|x - a|^{n+1}

    ∣f(x)−Pn(x)∣≤M(n+1)!∣x−a∣n+1|f(x) - P_n(x)| \le \frac{M}{(n+1)!}|x - a|^{n+1}, where M is at least ∣f(n+1)∣|f^{(n+1)}| everywhere between a and x.

    Loses the mark: “the error is the last term used”. The bound is built from the first term left out, with M in place of the derivative.

    Example: For P3P_3 of sin⁡x\sin x at x=0.5x = 0.5, the Lagrange error bound with M=1M = 1 is 0.544!≈0.0026\frac{0.5^4}{4!} \approx 0.0026.

  41. bound on the next derivative

    M≥∣f(n+1)(z)∣M \ge |f^{(n+1)}(z)|

    A justified bound M on ∣f(n+1)∣|f^{(n+1)}| between the center and x, for the Lagrange bound.

    Loses the mark: “the next derivative evaluated at the center”. M must hold on the whole interval from a to x; the value at a alone is not enough.

    Example: Since f(4)(x)=ex≤e0.5<2f^{(4)}(x) = e^x \le e^{0.5} < 2 on [0,0.5][0, 0.5], 2 is a bound on the next derivative for P3P_3 of exe^x.

  42. Taylor remainder

    Rn(x)=f(x)−Pn(x)R_n(x) = f(x) - P_n(x)

    The actual error Rn(x)=f(x)−Pn(x)R_n(x) = f(x) - P_n(x) of a Taylor estimate, not just a bound on it.

    Loses the mark: “the error bound is the error”. The bound is only a guaranteed maximum; the remainder is usually smaller.

    Example: The Taylor remainder for cos⁡0.2\cos 0.2 with P2P_2 is under 0.0001, so the estimate 0.98 is good to three decimal places.

  43. power series

    ∑n=0∞cn(x−a)n\sum_{n=0}^{\infty} c_n (x - a)^n

    A series ∑cn(x−a)n\sum c_n (x - a)^n in powers of (x−a)(x - a), defining a function wherever it converges.

    Loses the mark: “a power series converges for every x”. Most converge only on an interval around the center.

    Example: The power series ∑(x−3)n2n\sum \frac{(x - 3)^n}{2^n} is centered at 3 and converges for 1<x<51 < x < 5.

  44. radius of convergence

    RR

    The number R where a power series converges absolutely for ∣x−a∣<R|x - a| < R and diverges for ∣x−a∣>R|x - a| > R.

    Loses the mark: “the radius is the ratio limit”. Set the ratio limit, which contains ∣x−a∣|x - a|, less than 1 and solve; R comes from that inequality.

    Example: The ratio test gives ∣x+1∣4<1\frac{|x + 1|}{4} < 1, so the radius of convergence is 4 and the series is centered at −1-1.

  45. interval of convergence

    All x where a power series converges: (a−R,a+R)(a - R, a + R) plus any endpoints that converge.

    Loses the mark: “the ratio test settles the endpoints”. At an endpoint the ratio limit equals 1, so each endpoint needs its own test.

    Example: For ∑xnn\sum \frac{x^n}{n} the interval of convergence is [−1,1)[-1, 1): at x=−1x = -1 the alternating series test applies, and at x=1x = 1 it is the harmonic series.

  46. testing the endpoints

    Substituting each endpoint a±Ra \pm R into the power series and testing the resulting number series.

    Loses the mark: “the endpoints are included”. An endpoint is included only if its own series is shown to converge.

    Example: Testing the endpoints of ∑(x−2)nn2\sum \frac{(x - 2)^n}{n^2}, both x=1x = 1 and x=3x = 3 give series that converge absolutely by comparison with ∑1n2\sum \frac{1}{n^2}.

  47. Taylor series

    ∑n=0∞f(n)(a)n!(x−a)n\sum_{n=0}^{\infty} \dfrac{f^{(n)}(a)}{n!}(x - a)^n

    The infinite series ∑n=0∞f(n)(a)n!(x−a)n\sum_{n=0}^\infty \frac{f^{(n)}(a)}{n!}(x - a)^n, the limit of the Taylor polynomials of f about a.

    Loses the mark: “equals f wherever f is defined”. It equals f only on its interval of convergence; 11−x\frac{1}{1 - x} exists at x=3x = 3, but its series diverges there.

    Example: The Taylor series for ln⁡x\ln x about 1 is (x−1)−(x−1)22+(x−1)33−⋯(x - 1) - \frac{(x - 1)^2}{2} + \frac{(x - 1)^3}{3} - \cdots for 0<x≤20 < x \le 2.

  48. Maclaurin series

    ∑n=0∞f(n)(0)n!xn\sum_{n=0}^{\infty} \dfrac{f^{(n)}(0)}{n!}x^n

    A Taylor series centered at 0, such as those for exe^x, sin⁡x\sin x, cos⁡x\cos x and 11−x\frac{1}{1 - x}.

    Loses the mark: “sine has the even powers”. Sine is odd and uses odd powers; cosine uses even powers starting at 1.

    Example: Recognizing the Maclaurin series for exe^x at x=2x = 2 gives ∑n=0∞2nn!=e2\sum_{n=0}^\infty \frac{2^n}{n!} = e^2.

  49. represents the function

    Said of a power series whose sum equals f(x) at every x of an interval.

    Loses the mark: “the arctan series works for every x”. The series for arctan⁡x\arctan x converges only for −1≤x≤1-1 \le x \le 1.

    Example: The series ∑(−1)nxn\sum (-1)^n x^n represents the function 11+x\frac{1}{1 + x} only for −1<x<1-1 < x < 1.

  50. substitution into a known series

    Replacing x in a known series by an expression such as −x2-x^2.

    Loses the mark: “(-x^2)^n equals -x^(2n)”. The minus sign is raised to the power too: (−x2)n=(−1)nx2n(-x^2)^n = (-1)^n x^{2n}.

    Example: Substitution into a known series gives e−x2=1−x2+x42!−x63!+⋯e^{-x^2} = 1 - x^2 + \frac{x^4}{2!} - \frac{x^6}{3!} + \cdots for every x.

  51. term-by-term differentiation

    Differentiating a power series term by term; the radius is unchanged but endpoints need rechecking.

    Loses the mark: “the new series keeps the old interval”. The radius is kept, but endpoint behavior can change and must be tested again.

    Example: Term-by-term differentiation of 11−x=∑xn\frac{1}{1 - x} = \sum x^n gives 1(1−x)2=∑nxn−1\frac{1}{(1 - x)^2} = \sum n x^{n-1} for ∣x∣<1|x| < 1.

  52. term-by-term integration

    Integrating a power series term by term, adding a constant from the center; radius unchanged.

    Loses the mark: “no constant when integrating a series”. Each antiderivative needs C; set it from the known value at the center, such as arctan⁡0=0\arctan 0 = 0.

    Example: Term-by-term integration of 11+t2=∑(−1)nt2n\frac{1}{1 + t^2} = \sum (-1)^n t^{2n} from 0 to x gives arctan⁡x=∑(−1)nx2n+12n+1\arctan x = \sum \frac{(-1)^n x^{2n+1}}{2n + 1}.

  53. multiplying by a power of x

    Multiplying every term by xkx^k, raising each exponent by k; coefficients and radius stay unchanged.

    Loses the mark: “multiply the denominators by x too”. Only the powers of x change; each coefficient, denominator included, stays the same.

    Example: Multiplying by a power of x, x2ex=x2+x3+x42!+⋯x^2 e^x = x^2 + x^3 + \frac{x^4}{2!} + \cdots, so the coefficient of x5x^5 is 13!\frac{1}{3!}.