marlio

AP Calculus BC, Unit 8

Exam words: Applications of Integration

The 26 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.

Study these words as a deck

Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.

The words

  1. average value of a function

    favg=1b−a∫abf(x) dxf_{avg} = \frac{1}{b - a}\int_a^b f(x)\,dx

    (1/(b - a)) times the integral of f over [a, b], the mean height of f.

    Loses the mark: “the average value is the average of the endpoint values”. Averaging two outputs ignores everything in between; integrate and divide by the length.

    Example: The average value of a function giving the day's temperature, over 0 to 24 hours, is the integral divided by 24.

  2. Mean Value Theorem for integrals

    Continuous f on [a, b] equals its average value at some c.

    Loses the mark: “the average happens at the middle”. The theorem says some c exists; it is rarely the midpoint.

    Example: By the Mean Value Theorem for integrals, the temperature equaled its daily average at some hour.

  3. displacement

    ∫abv(t) dt\int_a^b v(t)\,dt · Units: m

    The net change in position, the integral of v(t) from a to b.

    Loses the mark: “displacement is the distance traveled”. Distance counts every leg as positive; displacement lets them cancel.

    Example: The elevator's displacement from 0 to 60 seconds is the integral of v, which is 12 meters up.

  4. total distance traveled

    ∫ab∣v(t)∣ dt\int_a^b |v(t)|\,dt · Units: m

    The integral of |v(t)| from a to b, adding every leg of the motion.

    Loses the mark: “distance is the absolute value of the displacement”. If the object turns around, the size of the displacement is less than the distance.

    Example: The jogger's total distance traveled is the integral of |v|, 5 km, even though she ended 1 km from the start.

  5. initial position plus displacement

    x(b)=x(a)+∫abv(t) dtx(b) = x(a) + \int_a^b v(t)\,dt

    Position at b: x(b) = x(a) plus the integral of v(t) from a to b.

    Loses the mark: “position and displacement are the same number”. Position also needs the starting position added.

    Example: The boat starts 3 km from shore, so its position at noon is the initial position plus displacement: 3 + 4 = 7 km.

  6. net change theorem

    A(b)=A(a)+∫abA′(t) dtA(b) = A(a) + \int_a^b A'(t)\,dt

    A(b) = A(a) + the integral of A′(t) from a to b: starting amount plus net change.

    Loses the mark: “the integral is the amount at time b”. The integral is the change; the starting amount must be added.

    Example: By the net change theorem, the reservoir holds 800 plus the integral of the net flow from 0 to 6, which is 950 cubic meters.

  7. rate in minus rate out

    The net rate of change of an amount: inflow rate minus outflow rate.

    Loses the mark: “every flow adds to the total”. Outflow is subtracted; only the net rate gives the change in the amount.

    Example: The tank's level changes at the rate in minus rate out, 7 - 4 = 3 liters per minute at t = 5.

  8. inflow equals outflow

    The moment the net rate is 0; a positive-to-negative change there gives a maximum.

    Loses the mark: “the amount peaks when the inflow peaks”. The amount keeps rising while inflow exceeds outflow; it peaks when the net rate changes sign.

    Example: The crowd is largest at 3 p.m., when inflow equals outflow and the net rate changes from positive to negative.

  9. area between curves

    ∫ab(f(x)−g(x))dx\int_a^b \left(f(x) - g(x)\right)dx

    The integral from a to b of (top curve minus bottom curve) dx.

    Loses the mark: “the area under the top curve”. The area under the bottom curve must be taken away.

    Example: The area between curves y = x and y = x², from 0 to 1, is the integral of x - x², or 1/6.

  10. top minus bottom

    Each vertical slice's height is the upper curve's y minus the lower curve's y.

    Loses the mark: “the order of subtraction does not matter”. Subtracting the wrong way gives a negative area.

    Example: On [0, 1], x lies above x², so the slice height is top minus bottom: x - x².

  11. points of intersection

    Where two curves meet, found by solving f(x) = g(x); they give the limits of integration.

    Loses the mark: “the bounds are whatever numbers are handy”. The bounds come from where the curves meet or from the region's stated edges.

    Example: Setting x = x² gives the points of intersection x = 0 and x = 1, the limits of the area integral.

  12. integrating with respect to y

    ∫cd(h(y)−g(y))dy\int_c^d \left(h(y) - g(y)\right)dy

    Slices of thickness dy, each of length right curve minus left curve.

    Loses the mark: “vertical slices always work with one integral”. Some regions need several vertical integrals but only one horizontal one.

    Example: Integrating with respect to y, the region between x = y² and x = y + 2 needs a single integral from y = -1 to y = 2.

  13. right minus left

    Each horizontal slice's length is the right curve's x minus the left curve's x.

    Loses the mark: “subtract in the order listed for horizontal strips”. For horizontal strips, the curve farther right comes first.

    Example: For horizontal strips the length is right minus left: (y + 2) - y².

  14. x in terms of y

    Each boundary rewritten as x = h(y), so x can be read along a horizontal slice.

    Loses the mark: “integrate the y = formulas with respect to y”. The boundaries must be rewritten as x = h(y) first.

    Example: We rewrite y = √x as x = y² to express the boundary as x in terms of y.

  15. volume by cross sections

    V=∫abA(x) dxV = \int_a^b A(x)\,dx

    V = the integral from a to b of A(x) dx, with A(x) the slice area.

    Loses the mark: “every volume formula has a π”. π appears only when the cross sections are circles or semicircles.

    Example: The volume by cross sections of the cheese wedge is the integral of its square slices' areas from 0 to 4 cm.

  16. cross-sectional area

    A(x), the area of one slice as a function of position.

    Loses the mark: “integrate the base length”. The base length must be turned into an area first.

    Example: Each slice is a semicircle with diameter s, so the cross-sectional area is (π/8)s².

  17. base of the solid

    The region in the plane on which the solid stands; each slice's base crosses it.

    Loses the mark: “the base is the radius”. For semicircular sections the base segment is the diameter, so the radius is half of it.

    Example: The base of the solid is the region between y = 4 - x² and the x-axis, so each slice's base length is 4 - x².

  18. disc method

    V=π∫abR(x)2 dxV = \pi\int_a^b R(x)^2\,dx

    V = π times the integral of R² for a solid of revolution with no hole.

    Loses the mark: “π times the radius”. Each slice is a disc of area πR², so the radius is squared.

    Example: The disc method gives the vase's volume as π times the integral of (√x)² from 0 to 9.

  19. axis of rotation

    The line a region is revolved about; radii are measured from it.

    Loses the mark: “the slice direction does not matter”. Discs must be perpendicular to the axis of rotation.

    Example: With the line y = 3 as the axis of rotation, each radius is measured from y = 3.

  20. radius

    The distance from the axis of rotation to the boundary curve, such as 3 - f(x).

    Loses the mark: “the radius is the function value whatever the axis”. f(x) is the radius only when the axis is y = 0.

    Example: Revolving about y = -1, the radius is f(x) + 1, the distance from the axis to the curve.

  21. washer method

    V=π∫ab(R2−r2)dxV = \pi\int_a^b \left(R^2 - r^2\right)dx

    V = π times the integral of (R² - r²) for a solid with a hole.

    Loses the mark: “π(R - r)²”. Subtract the areas of the discs, πR² - πr², not the square of the gap.

    Example: The washer method gives the ring's volume as π times the integral of (4 - x²) from 0 to 1 when R = 2 and r = x.

  22. outer radius

    R, the distance from the axis of rotation to the boundary farther from it.

    Loses the mark: “the top curve is always the outer radius”. When the axis is above the region, the lower curve is farther away.

    Example: About y = 5, the curve y = 1 is farther from the axis, so the outer radius is 4.

  23. inner radius

    r, the distance from the axis of rotation to the nearer boundary.

    Loses the mark: “shift the radius the wrong way”. Measure distance from the axis: about y = -2, the radius is f(x) + 2.

    Example: About the x-axis, the inner radius is the lower curve's height, x, at each slice.

  24. arc length

    ∫ab(dxdt)2+(dydt)2 dt\int_a^b \sqrt{\left(\frac{dx}{dt}\right)^2 + \left(\frac{dy}{dt}\right)^2}\,dt

    Distance along a curve: the integral of speed (dx/dt)2+(dy/dt)2\sqrt{(dx/dt)^2 + (dy/dt)^2}, or of 1+(f′(x))2\sqrt{1 + (f'(x))^2} for y=f(x)y = f(x).

    Loses the mark: “integral of dx/dt squared plus dy/dt squared”. The square root is missing; without it the integrand is not the rate at which length builds up.

    Example: The arc length of the path x=t2x = t^2, y=t3y = t^3 from t=0t = 0 to t=1t = 1 is ∫014t2+9t4 dt≈1.440\int_0^1 \sqrt{4t^2 + 9t^4}\,dt \approx 1.440.

  25. arc length element

    dsds

    The length ds=(dx)2+(dy)2ds = \sqrt{(dx)^2 + (dy)^2} of a tiny piece of curve; arc length integrates ds.

    Loses the mark: “ds equals dx plus dy”. Perpendicular pieces combine by the Pythagorean theorem; the root of a sum is not the sum of the roots.

    Example: For y=x3/2y = x^{3/2} the arc length element is ds=1+94x dxds = \sqrt{1 + \frac94 x}\,dx.

  26. chord

    The straight segment joining a curve piece's ends; arc length is never less than it.

    Loses the mark: “the length is the distance between the endpoints”. That is the chord, a lower bound; a curved path is strictly longer.

    Example: The path's ends are about 1.414 apart, so an arc length of 1.440 is plausible: it is just longer than the chord.