AP Physics 1, Unit 1
Exam words: Kinematics
The 50 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.
Study these words as a deck
Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.
The words
scalar
A quantity with size and unit but no direction, such as speed or energy.
Loses the mark: “a speed of -4 m/s”. Speed is a scalar magnitude and is never negative; a negative sign belongs to a velocity component.
Example: Distance is a scalar, so the runner's two laps of the 400 m track count as 800 m whichever way she faced.
vector
A quantity with both magnitude and direction, such as displacement, velocity, force or momentum.
Loses the mark: “just add the two sizes together”. Vectors in opposite directions partly cancel; combine them with signs or components, not by adding magnitudes.
Example: Velocity is a vector, so with right as positive the cart rolling left at 2 m/s has a velocity of -2 m/s.
positive direction
The direction chosen as positive for displacement, velocity and acceleration in a problem.
Loses the mark: “up is positive on the way up and down is positive on the way down”. One motion needs one axis; switching the sign convention partway flips signs and corrupts the answer.
Example: Taking up as the positive direction, the tossed key's acceleration is -9.8 m/s² for its whole flight, rising and falling.
speeding up
Speeding up needs velocity and acceleration of the same sign; slowing down, opposite signs.
Loses the mark: “negative acceleration means it is slowing down”. A negative acceleration speeds up an object already moving in the negative direction; compare the signs of v and a.
Example: The cart's velocity and acceleration are both negative, so it is speeding up while it moves left.
magnitude
The size of a vector, zero or positive, with a unit but no direction.
Loses the mark: “the magnitude is -6 m/s”. A magnitude is never negative; the sign belongs to the component, not the size.
Example: The velocity is -6 m/s, so its magnitude, the speed, is 6 m/s.
position
· Units: m
Where an object is, as a coordinate measured from a chosen origin along an axis.
Loses the mark: “how far it has gone”. That describes distance traveled along the path; position is a coordinate fixed by the origin.
Example: With the start line as origin and east positive, the runner's position is x = -3 m, three meters west of the line.
displacement
· Units: m
The change in position, final minus initial, a vector set only by endpoints.
Loses the mark: “how far it traveled”. That is distance, a scalar for the whole path; displacement uses only the endpoints.
Example: After walking 5 m east and then 5 m back west, the student's displacement is zero although she walked 10 m.
distance traveled
Units: m
The total length of path covered, a scalar that never decreases and is never negative.
Loses the mark: “the size of the displacement”. Equals the distance only if the object never reverses or turns; on a round trip the two differ.
Example: The ball rises 2 m and falls back 2 m, so the distance traveled is 4 m while the displacement is zero.
origin
The point chosen as zero on an axis; positions depend on it, displacements do not.
Loses the mark: “where the object started”. The start may be chosen as origin, but it need not be; state the choice explicitly.
Example: Placing the origin at the traffic light, the parked car's position is +40 m.
average velocity
· Units: m/s
Displacement divided by the time interval, a vector pointing along the displacement.
Loses the mark: “average of the initial and final velocities”. This shortcut holds only when the acceleration is constant; in general divide displacement by time.
Example: The bus returns to its depot after an hour, so its average velocity for the round trip is zero.
average speed
Units: m/s
The total distance traveled divided by the elapsed time, a scalar that is never negative.
Loses the mark: “the average of the two speeds”. When equal distances are covered at different speeds, the slower part takes longer and counts for more.
Example: Driving 30 km at 30 km/h and then 30 km at 60 km/h gives an average speed of 40 km/h, not 45 km/h.
instantaneous velocity
· Units: m/s
The velocity at one instant, equal to the slope of the position-time graph's tangent there.
Loses the mark: “slope of the line joining the two end points”. A chord gives the average velocity over an interval, not the value at one instant.
Example: The instantaneous velocity at t = 3 s is the slope of the tangent to the curve at 3 s, about 4 m/s.
speed
Units: m/s
The magnitude of the velocity, a scalar in m/s that is never negative.
Loses the mark: “speed and velocity are the same thing”. Velocity also has a direction; a car at steady speed on a curve has a changing velocity.
Example: The car's speed stays at 15 m/s around the bend, but its velocity changes because its direction changes.
acceleration
· Units: m/s²
The rate of change of velocity with time, a vector.
Loses the mark: “acceleration is always in the direction of motion”. Acceleration points along the change in velocity, which is backward when an object slows.
Example: At the top of its flight the ball is momentarily at rest, yet its acceleration is still 9.8 m/s² downward.
average acceleration
· Units: m/s²
Change in velocity divided by the time interval, found as final minus initial velocity vectors.
Loses the mark: “current velocity divided by the time”. Acceleration uses the change in velocity; dividing the velocity itself ignores the starting value.
Example: The scooter goes from 2 m/s to 6 m/s forward in 4 s, so its average acceleration is 1 m/s² forward.
instantaneous acceleration
Units: m/s²
The acceleration at one instant, equal to the slope of the velocity-time graph's tangent there.
Loses the mark: “velocity at that time divided by the time”. This gives neither the average nor the instantaneous acceleration; use the slope of v against t.
Example: The instantaneous acceleration at t = 2 s is the slope of the velocity-time curve there, 3 m/s².
momentarily at rest
Zero velocity at one instant, while acceleration can be nonzero.
Loses the mark: “it stops so the acceleration is zero”. Zero velocity at one instant does not mean zero acceleration; gravity still changes the velocity.
Example: The ball is momentarily at rest at its highest point, but it is still accelerating downward at g.
constant acceleration
Units: m/s²
Acceleration with the same magnitude and direction throughout; the kinematic equations hold only then.
Loses the mark: “the equations work for any motion”. They assume constant acceleration; split the motion wherever the acceleration changes.
Example: The car has constant acceleration only while the brakes are on, so I apply the equations from the moment of braking to the stop.
kinematic equations
, ,
Equations linking displacement, initial and final velocity, acceleration and time for constant acceleration.
Loses the mark: “v^2 = v0^2 + 2at”. Dimensionally wrong: the last term must contain a displacement, not a time.
Example: Time is neither given nor asked for, so from the kinematic equations I choose .
initial velocity
· Units: m/s
The velocity at the start of the chosen time interval, signed by the positive direction.
Loses the mark: “assume it starts from rest”. Only true when the situation says so; otherwise the initial velocity must be given or found.
Example: With up positive, the ball's initial velocity is +12 m/s at the instant it leaves the hand.
stopping time
Units: s
The time a braking object takes to reach zero velocity.
Loses the mark: “plug in the full time even after it stops”. The equations would have the car reverse, which brakes cannot do.
Example: The stopping time is 3 s, so for the 5 s question I use the car's displacement at 3 s, when it has already stopped.
free fall
Motion under gravity alone, accelerating at g downward throughout, including the way up.
Loses the mark: “not in free fall until it starts coming down”. A thrown object is in free fall from the moment of release, including the rise.
Example: Once released the ball is in free fall, so its acceleration is 9.8 m/s² downward for the whole flight.
acceleration due to gravity
· Units: m/s²
The free-fall acceleration near Earth's surface, about 9.8 m/s² downward, the same for every mass.
Loses the mark: “the force of gravity is 9.8”. 9.8 m/s² is an acceleration; the gravitational force on an object is mg in newtons.
Example: Both coins have the same acceleration due to gravity, 9.8 m/s², so they hit the floor together.
maximum height
The highest point of a path, where vertical velocity is zero.
Loses the mark: “the acceleration is zero at the top”. Only the vertical velocity is zero at the top; gravity still acts there.
Example: At maximum height the vertical velocity is zero, so gives the height of the throw.
up-down symmetry
Without air resistance, rise and fall between equal heights take equal times.
Loses the mark: “it always takes the same time up as down”. Only without air resistance and when launch and landing heights are equal.
Example: By up-down symmetry, the ball returns to my hand at 12 m/s, the speed it left with, after twice the rise time.
slope of the position-time graph
At any instant, the slope of the position-time graph equals the velocity at that instant.
Loses the mark: “height of the position-time graph”. The height gives position, not velocity; read the slope.
Example: The slope of the position-time graph is steepest at t = 2 s, so the cart is moving fastest then.
area under the velocity-time graph
The signed area between a velocity-time graph and the time axis, equal to displacement.
Loses the mark: “the area gives the final position”. The area gives the change in position; add the initial position to find where it ends.
Example: The area under the velocity-time graph from 0 to 4 s is 12 m, so the cart's displacement is 12 m.
slope of the velocity-time graph
The slope of a velocity-time graph equals the acceleration; a straight line means constant acceleration.
Loses the mark: “equally steep lines mean the same rate”. Steepness depends on the axis scales and units; compute the slope with units.
Example: The slope of the velocity-time graph is -2 m/s², so the cyclist's acceleration is 2 m/s² backward.
area under the acceleration-time graph
The signed area under an acceleration-time graph, equal to the change in velocity.
Loses the mark: “the area gives the final velocity”. The area gives the change in velocity; add the initial velocity.
Example: The area under the acceleration-time graph is 6 m/s, so the cart, starting at 2 m/s, ends at 8 m/s.
vector components
The perpendicular parts of a vector along chosen axes, which add to the original vector.
Loses the mark: “the horizontal part is always F sin theta”. Which function applies depends on where the angle is measured; the side adjacent to the angle takes cosine.
Example: The 50 N pull at 30° above the floor has vector components of 43 N along the floor and 25 N upward.
resultant
The single vector equal to the sum of several vectors.
Loses the mark: “3 N and 4 N always make 7 N”. Magnitudes add directly only for parallel vectors; at right angles the result is 5 N.
Example: The resultant of 3 N east and 4 N north is 5 N at 53° north of east.
triangle inequality
A vector sum's magnitude lies between the difference and the sum of the magnitudes.
Loses the mark: “the resultant is always bigger than either vector”. Vectors at wide angles can give a resultant smaller than one of them.
Example: By the triangle inequality, forces of 3 N and 4 N combine to between 1 N and 7 N, so an 8 N result is impossible.
direction angle
The angle a vector makes with a stated reference axis.
Loses the mark: “the calculator angle is the direction”. Inverse tangent returns only quadrants I and IV; check the signs of the components.
Example: Both components are negative, so the direction angle is 37° south of west, not the calculator's 37° north of east.
projectile
An object moving under gravity alone, with constant horizontal velocity and downward acceleration g.
Loses the mark: “the horizontal velocity decreases as it rises”. No horizontal force acts, so the horizontal component stays constant.
Example: Treating the ball as a projectile, its horizontal velocity stays 8 m/s while its vertical velocity changes by 9.8 m/s every second.
independence of horizontal and vertical motion
A projectile's horizontal and vertical motions evolve separately, sharing only the time.
Loses the mark: “the fired one has further to go so it lands later”. Landing time depends only on the vertical motion, which is the same for both.
Example: By the independence of horizontal and vertical motion, the dropped coin and the flicked coin land together.
time of flight
Units: s
The time a projectile spends in the air, set entirely by its vertical motion.
Loses the mark: “time found from the horizontal speed alone”. The horizontal motion does not end the flight; the vertical motion does.
Example: The time of flight from the 20 m wall is 2.0 s, so the stone travels 2.0 s × 6 m/s = 12 m horizontally.
range
Units: m
The horizontal displacement of a projectile from launch to landing.
Loses the mark: “45 degrees always gives the farthest throw”. Only when launch and landing heights are equal and air resistance is ignored.
Example: Launched and caught at the same height, the ball's range is , largest at 45°.
trajectory
The path a projectile follows, a parabola when air resistance is neglected.
Loses the mark: “goes straight and then drops down”. Gravity bends the path from the instant of launch; there is no straight section.
Example: The trajectory is a parabola because the horizontal position grows in proportion to t while the drop grows with t squared.
reference frame
A coordinate system attached to an observer, against which positions and velocities are measured.
Loses the mark: “the actual speed”. Every frame's measurement is equally valid; name the frame instead of calling one real.
Example: In the reference frame of the train the coffee cup is at rest, while in the ground frame it moves at 30 m/s.
relative velocity
· Units: m/s
One object's velocity as measured by an observer moving with another.
Loses the mark: “use Pythagoras for the speed”. Only valid when the two velocities are perpendicular; otherwise add components.
Example: The boat's relative velocity to the shore is its velocity relative to the water plus the water's velocity relative to the shore.
inertial reference frame
A non-accelerating frame, in which Newton's first law holds.
Loses the mark: “a frame that is not moving”. Any frame moving at constant velocity is inertial; what matters is that it does not accelerate.
Example: The smoothly cruising train is an inertial reference frame, so a ball dropped inside falls straight down relative to the train.
slope
The change in the vertical quantity divided by the change in the horizontal one.
Loses the mark: “slope from the two end points of the curve”. On a curve that gives an average; use the tangent at the instant asked.
Example: The slope of the momentum-time graph has units of kg·m/s per s, so it gives the net force, 3 N.
tangent line
The straight line touching a curve at one point with the curve's slope there.
Loses the mark: “the line through the two end points gives the rate at that instant”. A line through two points gives the average rate over the interval; the instantaneous rate is the slope of the tangent line.
Example: At t = 2 s the tangent line to the position-time curve rises 6 m over 1.5 s, so the instantaneous velocity there is 4 m/s.
area under a graph
The signed area between a graph and its horizontal axis.
Loses the mark: “area under the position-time graph”. Position times time has no useful physical meaning in this course.
Example: The area under a graph of power against time has units of W·s, so it gives the energy delivered.
labeled axes with units
Each axis names its quantity and unit, which decide what slope and area mean.
Loses the mark: “a bare axis with just numbers”. Without a quantity and unit, slopes and areas cannot be interpreted.
Example: With labeled axes with units, force in N against time in s, the area is clearly an impulse in N·s.
directly proportional
Scaling one quantity by a factor scales the other by the same factor.
Loses the mark: “doubling the length doubles the period”. Period grows as the square root of length, so doubling L multiplies T by √2.
Example: At fixed mass, acceleration is directly proportional to net force, so tripling the force triples the acceleration.
inverse-square relationship
One quantity varying as one over the square of another.
Loses the mark: “doubling the distance halves the field”. In an inverse-square relationship doubling r quarters the result.
Example: Gravity follows an inverse-square relationship, so tripling the distance cuts the force to one ninth.
ratio of the two cases
Writing the new value over the old so unchanged quantities cancel.
Loses the mark: “plug in made-up numbers”. Trial numbers can hide which quantities were held fixed; write the ratio symbolically.
Example: Taking the ratio of the two cases, T₂/T₁ = √(L₂/L₁) = √4 = 2, so the period doubles.
multiple representations
Different descriptions of one situation, in words, diagrams, graphs and equations, which must all agree.
Loses the mark: “the solution is wrong because it takes down as positive”. Any declared sign convention is valid if used consistently.
Example: Across the multiple representations, the free-body diagram, the v-t graph and the equation all show the net force pointing backward.
consistency check
A question every representation must answer the same way, such as the net force's direction.
Loses the mark: “the arrows look about right”. Arrow lengths must match the equations, for example equal arrows when forces balance.
Example: As a consistency check, the bar chart's growing kinetic energy matches the v-t graph's rising line.