AP Physics 1, Unit 4
Exam words: Linear Momentum
The 25 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.
Study these words as a deck
Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.
The words
momentum
· Units: kg·m/s
The product of an object's mass and velocity, a vector along the velocity, in kg·m/s.
Loses the mark: “the heavier truck always has more momentum”. Momentum depends on speed as well as mass; a fast light object can have more.
Example: With right as positive, the 0.15 kg ball moving left at 20 m/s has momentum -3 kg·m/s.
total momentum
· Units: kg·m/s
The vector sum of the momenta of all the objects in a system.
Loses the mark: “adding the momenta without signs”. Momenta in opposite directions cancel; add them with signs or as vectors.
Example: Two 1 kg carts rolling toward each other at 2 m/s have a total momentum of zero.
impulse
· Units: N·s
Average force times the time it acts, equal to the change in momentum.
Loses the mark: “impulse in joules”. Impulse is measured in N·s, the same as kg·m/s; joules measure energy.
Example: The bat's impulse on the 0.15 kg ball is 0.15 × (30 - (-20)) = 7.5 N·s toward the outfield.
impulse-momentum theorem
The impulse of the net force on an object equals the object's change in momentum.
Loses the mark: “the airbag reduces the change in momentum”. The change in momentum is fixed by the initial and final velocities; the time is what changes.
Example: By the impulse-momentum theorem, the airbag spreads the same change in momentum over more time, so the average force is smaller.
change in momentum
· Units: kg·m/s
Final momentum minus initial momentum, found by vector subtraction.
Loses the mark: “no change because the speed is the same”. The direction reversed, so the momentum changed by twice its size.
Example: The ball hits the wall at 5 m/s and rebounds at 5 m/s, so its change in momentum is 2mv, not zero.
average force
· Units: N
The change in momentum divided by the contact time.
Loses the mark: “the putty and the rubber ball push equally hard”. The rebounding ball has the larger change in momentum, so it pushes harder on average.
Example: Stopping the 70 kg rider from 15 m/s in 0.5 s takes an average force of 2100 N from the seat belt.
contact time
· Units: s
The time over which colliding objects push on each other.
Loses the mark: “the cushion absorbs the force”. Forces are not absorbed; the cushion lengthens the stopping time so the force is smaller.
Example: The crumple zone increases the contact time of the crash, lowering the average force on the passengers.
area under the force-time graph
The signed area between a force-time graph and the time axis, equal to the impulse.
Loses the mark: “the area is the kinetic energy change”. The area under force against time is impulse, in N·s, not energy.
Example: The triangular pulse peaks at 400 N over 0.01 s, so the area under the force-time graph is 2 N·s.
peak force
Units: N
The largest force reached during a collision, always at least the average force.
Loses the mark: “the force of the collision is the peak value”. Use the average force with the contact time to find the impulse.
Example: The peak force of the triangular pulse is 400 N, twice the 200 N average force.
conservation of momentum
A system's total momentum stays constant when the net external impulse on it is zero.
Loses the mark: “momentum is conserved in every collision”. Only for a named system with zero net external impulse.
Example: Momentum is conserved because the net external impulse on the two-skater system is zero, so their momenta still sum to zero after the push.
net external impulse
Units: N·s
The total impulse from forces outside the system; when zero, total momentum is conserved.
Loses the mark: “no forces act so it is conserved”. Forces may act; what matters is that the external ones give no net impulse.
Example: During the 0.01 s collision the net external impulse from friction is negligible, so I conserve the two carts' momentum.
momentum conserved along one axis
A momentum component is conserved along any direction where the net external force is zero.
Loses the mark: “cannot use momentum because gravity acts”. Gravity is vertical; horizontal momentum is still conserved.
Example: Gravity is vertical, so momentum conserved along one axis lets me use the horizontal momentum of the cart and dropped sandbag.
elastic collision
A collision in which the system's total kinetic energy is the same before and after.
Loses the mark: “rubber balls always collide elastically”. Whether a collision is elastic is decided by kinetic energy, not by the material.
Example: The steel ball hitting the identical resting ball is an elastic collision, so the first stops and the second moves off at its speed.
inelastic collision
A collision conserving momentum but turning some kinetic energy into thermal energy, sound or deformation.
Loses the mark: “momentum is not conserved because they deform”. Deformation is internal; momentum is still conserved if external impulse is negligible.
Example: The car crash is an inelastic collision: momentum is conserved while kinetic energy goes into bending metal.
perfectly inelastic collision
A collision in which the objects stick together and move off with a common velocity.
Loses the mark: “all kinetic energy is lost when they stick”. Only the kinetic energy that momentum conservation allows is lost; the pair still moves.
Example: The dart sticking in the cart is a perfectly inelastic collision, so I use momentum conservation, not energy, for that step.
ballistic pendulum
A hanging block that catches a projectile, then swings up.
Loses the mark: “half m v squared equals (m + M) g h”. Kinetic energy is not conserved during the embedding, so one energy equation skips a lossy step.
Example: For the ballistic pendulum, momentum conservation gives the speed after the catch, then energy conservation gives the rise.
recoil
Backward motion of one part of a system as it pushes another forward.
Loses the mark: “the pieces move off at the same speed”. Equal and opposite momenta mean the lighter piece moves faster.
Example: The 4 kg launcher's recoil speed is 0.5 m/s when it fires a 0.01 kg ball forward at 200 m/s.
explosion
Internal forces push a system's parts apart while total momentum stays fixed.
Loses the mark: “the energy is shared equally between the pieces”. The lighter fragment gets more kinetic energy, in the inverse ratio of the masses.
Example: In the explosion the two fragments' momenta sum to zero, and the 1 kg piece gets twice the kinetic energy of the 2 kg piece.
momentum components
The x and y parts of momentum, each conserved separately without a net external impulse.
Loses the mark: “kinetic energy in the x direction”. Kinetic energy is a scalar and has no components.
Example: Conserving the momentum components east and north gives two equations for the two unknowns after the crash.
glancing collision
An off-center collision after which the objects move at angles to the original line.
Loses the mark: “the paths are always at right angles”. Only for an elastic collision of equal masses with one at rest.
Example: In the glancing collision on the air table, the puck's sideways momentum after impact must cancel the target's.
velocity of the center of mass
· Units: m/s
A system's total momentum divided by its total mass.
Loses the mark: “the collision forces accelerate the center of mass”. Those forces are internal and cancel in pairs.
Example: During the crash the velocity of the center of mass stays 3 m/s, because only internal forces act between the carts.
limiting case
A formula check using a special value, such as zero, where the answer is known.
Loses the mark: “it gave infinity so the formula is wrong”. An infinity can be correct, for example a period as g goes to zero; check the physics.
Example: In the limiting case θ = 0 the incline is flat, so my acceleration g(sin θ - μ cos θ) correctly gives -μg.
system
The object or set of objects chosen for analysis, everything else being the surroundings.
Loses the mark: “momentum is always conserved”. It is conserved only for a named system with no net external impulse.
Example: Choosing the system of the block and Earth, gravity is internal and appears as gravitational potential energy.
surroundings
Everything outside the system boundary, affecting the system only through external forces and energy transfers.
Loses the mark: “friction between the block and cart on the system diagram”. With both in the system, that friction is internal and drops out.
Example: The road is part of the surroundings, so its friction on the tires is an external force on the car system.
system boundary
The imaginary closed line separating system from surroundings.
Loses the mark: “both a spring energy term and a work done by the spring term”. The spring is either inside, as energy, or outside, as work, never both.
Example: Drawing the system boundary around the cart and spring makes the spring force internal, stored as elastic potential energy.