AP Physics 1, Unit 5
Exam words: Torque and Rotational Dynamics
The 25 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.
Study these words as a deck
Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.
The words
angular position
· Units: rad
The angle, in radians, between a line fixed in the body and a reference line.
Loses the mark: “the angular position is the arc length”. Angular position is an angle from a reference line, in radians; the arc a point covers is r times the angle.
Example: With the reference line along +x and counterclockwise positive, the spoke has an angular position of π/2 rad when it points straight up.
angular displacement
· Units: rad
The angle in radians a rigid body turns through about an axis.
Loses the mark: “the distance the wheel turned”. Angular displacement is an angle, not a length; arc length is r times the angle.
Example: Counterclockwise positive, the wheel's angular displacement is -3π rad after one and a half clockwise turns.
angular velocity
· Units: rad/s
The rate of change of angular position, in rad/s.
Loses the mark: “the rim spins faster than the middle”. Every point of a rigid body shares one angular velocity; the rim has the greater linear speed.
Example: Every point on the turntable has an angular velocity of 3.5 rad/s, although the rim moves fastest.
angular acceleration
· Units: rad/s²
The rate of change of angular velocity, in rad/s².
Loses the mark: “negative alpha means it is slowing down”. It slows only when α and ω have opposite signs.
Example: The fan's angular acceleration is -2 rad/s² while its angular velocity is negative, so it is spinning up.
radian
rad
The angle at the center that cuts off an arc equal to the radius.
Loses the mark: “put the rpm straight into v = omega r”. The relation v = ωr needs ω in rad/s; convert rpm or degrees first.
Example: 45 rpm is 45 × 2π/60, about 4.7 radians per second, which is what goes into v = ωr.
rotational kinematic equations
,
The linear kinematic equations rewritten with θ, ω and α for constant angular acceleration.
Loses the mark: “use the equations with a changing torque”. They hold only while the angular acceleration is constant.
Example: Using the rotational kinematic equations, the wheel slowing at 2 rad/s² from 10 rad/s stops after 25 rad.
tangential speed
· Units: m/s
A point's linear speed on a rotating body, equal to r times angular speed.
Loses the mark: “every point on the wheel moves at the same speed”. Points farther from the axis move faster, in proportion to r.
Example: A point 0.15 m from the axis of the 4 rad/s turntable has a tangential speed of 0.6 m/s.
tangential acceleration
· Units: m/s²
A point's acceleration component along its path, equal to r times the angular acceleration.
Loses the mark: “alpha r toward the center”. The inward part is ω squared r; α times r is along the path.
Example: The blade tip's tangential acceleration is rα = 1.2 m/s², while its centripetal acceleration is ω²r toward the hub.
slipping
Relative sliding between a wheel and the surface at their contact point.
Loses the mark: “v = omega R for the wheel spinning on ice”. That relation holds only when the contact point does not slip.
Example: The locked wheel is slipping on the wet road, so its center moves at 8 m/s while ω is zero.
torque
· Units: N·m
The turning effect of a force about an axis, r F sin φ.
Loses the mark: “torque is r times F”. Only the part of the force perpendicular to r turns the object.
Example: About the hinge, a 20 N push perpendicular to the door 0.8 m out gives a torque of 16 N·m.
lever arm
· Units: m
The perpendicular distance from the axis to the line of action of a force.
Loses the mark: “the distance to where the force is applied”. Only the perpendicular distance to the line of action sets the torque.
Example: Pulling the wrench at an angle shortens the lever arm to 0.15 m, so the torque drops.
axis of rotation
The line a body turns about, or about which torques are computed.
Loses the mark: “torque about the object”. A torque must be about a named point or axis, not about the object in general.
Example: Taking the axis of rotation at the door's hinge, the doorknob push has the largest torque.
line of action
The straight line through the point where a force is applied, along the force's direction.
Loses the mark: “pulling straight through the hinge gives the most torque”. A force whose line of action passes through the axis gives zero torque.
Example: The line of action of the pull passes through the hinge, so it produces no torque about the hinge.
couple
Equal and opposite forces on different lines: no net force, but a net torque.
Loses the mark: “the two forces cancel so nothing happens”. They cancel as forces, but their torques add.
Example: Turning the steering wheel with both hands applies a couple, rotating the wheel without moving its center.
rotational inertia
· Units: kg·m²
A body's resistance to angular acceleration about an axis, I = Σmr².
Loses the mark: “spinning faster gives more rotational inertia”. I depends on the mass and where it sits relative to the axis, not on the spin rate.
Example: The hoop's rotational inertia, MR², is twice the solid disk's, so the same torque spins it up half as fast.
mass distribution
How a body's mass is spread relative to the axis.
Loses the mark: “only the total mass matters”. Two bodies of equal mass can have very different I if their mass sits at different distances.
Example: The skater's mass distribution changes when she spreads her arms, so her rotational inertia increases.
rotational inertia about a named axis
Rotational inertia depends on the chosen axis, as a rod's differs at center and end.
Loses the mark: “the rod's moment of inertia is ML^2/12”. That value is for the center axis only; another axis gives another value.
Example: I use the rotational inertia about a named axis, the hinge at the rod's end, which is ML²/3.
parallel-axis theorem
I = I_cm + Md² for an axis parallel to the center-of-mass axis, d away.
Loses the mark: “move the axis from the end to the quarter point with d = L/4”. The theorem must start from the center-of-mass axis; go through it first.
Example: By the parallel-axis theorem, a rod about its end has I = ML²/12 + M(L/2)² = ML²/3.
rotational equilibrium
The state of zero net torque about every axis, so the angular velocity stays constant.
Loses the mark: “balanced because the weights are equal”. Torques must cancel, which depends on distances from the pivot as well as forces.
Example: The balanced seesaw is in rotational equilibrium because the torques of the two children about the pivot cancel.
static equilibrium
Being at rest with both the net force and the net torque equal to zero.
Loses the mark: “in equilibrium because the forces balance”. The torques must also balance; balanced forces alone can still spin the body.
Example: For the ladder in static equilibrium I write ΣFx = 0, ΣFy = 0 and Στ = 0 about its foot.
center of gravity
The point where a body's whole weight can be taken to act for torques.
Loses the mark: “the weight acts at the end of the beam”. For a uniform beam the weight acts at its center, not at an end.
Example: The plank's center of gravity is at its midpoint, so its weight acts 2 m from the support.
Newton's second law for rotation
Net torque about a fixed axis equals rotational inertia times angular acceleration.
Loses the mark: “the bigger torque always gives the bigger angular acceleration”. Angular acceleration also depends on the rotational inertia of each body.
Example: By Newton's second law for rotation, the 6 N·m net torque on the 2 kg·m² wheel gives an angular acceleration of 3 rad/s².
net torque
· Units: N·m
The sum of the torques about one axis, each signed by its sense.
Loses the mark: “add the torques without signs”. Torques in opposite senses partly cancel.
Example: The net torque about the axle is 12 N·m counterclockwise minus 4 N·m clockwise, so 8 N·m counterclockwise.
constraint equation
A relation, such as a = αR, linking linear and angular acceleration without slipping.
Loses the mark: “a and alpha are separate unknowns”. Without the constraint the system has more unknowns than equations.
Example: The constraint equation a = αR ties the falling bucket to the windlass, giving three equations for three unknowns.
pulley with rotational inertia
A pulley with nonzero rotational inertia, needing different tensions on its two sides to accelerate.
Loses the mark: “one tension on both sides of the pulley”. Equal tensions give zero net torque, so a pulley with mass could not speed up.
Example: Because it is a pulley with rotational inertia, the tension on the hanging side is larger than on the table side.