marlio

AP Precalculus, Unit 2

Exam words: Exponential and Logarithmic Functions

The 50 words a written answer in this unit needs. For each one: what it means, a wording that loses the mark and why, and a sentence that uses it the way a full answer would.

Study these words as a deck

Flashcards, Learn, Test and Match in Cards, with your Still learning marks kept, and the booklet to print on A4 or US Letter. Sign in to open it.

The words

  1. arithmetic sequence

    an=a0+dna_n = a_0 + dn

    A sequence where each term is the previous term plus a fixed common difference d.

    Loses the mark: “the terms go up evenly”. Vague: state the common difference and the nth term rule.

    Example: Seat counts 20, 24, 28, 32 form an arithmetic sequence with common difference 4.

  2. geometric sequence

    gn=g0rng_n = g_0 r^n

    A sequence where each term is the previous term times a fixed common ratio r.

    Loses the mark: “the terms double each time”. Only true when r = 2; state the common ratio found by dividing terms.

    Example: Bacteria counts 50, 150, 450, 1350 form a geometric sequence with common ratio 3.

  3. common difference

    dd

    The fixed amount added to each arithmetic sequence term to get the next.

    Loses the mark: “the difference between the two given terms”. If the given terms are k steps apart, divide that difference by k.

    Example: Since a_2 = 11 and a_6 = 27 are four steps apart, the common difference is 16/4 = 4.

  4. common ratio

    rr

    The fixed factor each geometric sequence term is multiplied by to get the next.

    Loses the mark: “divide the total growth by the number of steps”. Over k steps the factor is rᵏ, so take the kth root, not a share.

    Example: Since g_1 = 6 and g_3 = 54, r² = 9 and the common ratio is 3 for positive terms.

  5. exponential function

    f(x)=a⋅bxf(x) = a \cdot b^x

    A function f(x) = a·bˣ with a ≠ 0, b > 0 and b ≠ 1.

    Loses the mark: “exponential means it speeds up”. Exponential decay slows down; the defining feature is a constant ratio over equal steps.

    Example: The output ratios over each 1-hour step are all 1.5, so the data fit an exponential function.

  6. additive change

    Change by a constant amount over equal input steps, the pattern of linear functions.

    Loses the mark: “goes up by the same percent”. A constant percent is a constant factor, which is multiplicative, not additive.

    Example: Saving $40 every week is additive change, so the balance grows linearly.

  7. multiplicative change

    Change by a constant factor over equal input steps, the pattern of exponential functions.

    Loses the mark: “adds the same amount each time”. That describes additive change; a constant factor changes the amount added each step.

    Example: A balance that gains 4% a year shows multiplicative change, with factor 1.04 each year.

  8. initial value

    aa

    The output of a function at input 0; for f(x) = a·bˣ it is a.

    Loses the mark: “the first value in the table”. A table need not start at input 0.

    Example: In f(t) = 800(0.9)ᵗ, the initial value is 800 milligrams, the amount at t = 0.

  9. growth factor

    b>1b > 1

    The base b > 1 of an exponential function, the factor per unit input.

    Loses the mark: “the growth factor is the percent”. A 6% increase means a growth factor of 1.06, not 0.06 or 6.

    Example: In P(t) = 1200(1.06)ᵗ the growth factor 1.06 means the population is multiplied by 1.06 each year.

  10. decay factor

    0<b<10 < b < 1

    The base b, where 0 < b < 1, giving the factor per unit input.

    Loses the mark: “a negative coefficient means decay”. Decay comes from a base between 0 and 1; a negative a reflects the graph instead.

    Example: A decay factor of 0.85 per hour means 85% of the medicine remains after each hour.

  11. product property of exponents

    bmbn=bm+nb^m b^n = b^{m+n}

    Multiplying powers of the same base adds the exponents: bᵐ·bⁿ = bᵐ⁺ⁿ.

    Loses the mark: “multiply the exponents”. Exponents are multiplied for a power of a power, not for a product of powers.

    Example: By the product property of exponents, 2ˣ⁺³ = 2³·2ˣ = 8·2ˣ.

  12. quotient property of exponents

    bmbn=bm−n\frac{b^m}{b^n} = b^{m-n}

    Dividing powers of the same base subtracts the exponents: bᵐ/bⁿ = bᵐ⁻ⁿ.

    Loses the mark: “divide the exponents”. Dividing powers of one base subtracts the exponents.

    Example: The quotient property of exponents gives 5ˣ/5² = 5ˣ⁻².

  13. power property of exponents

    (bm)n=bmn(b^m)^n = b^{mn}

    Raising a power to a power multiplies the exponents: (bᵐ)ⁿ = bᵐⁿ.

    Loses the mark: “add the exponents for a power”. A power of a power multiplies the exponents.

    Example: By the power property of exponents, 8ˣ = (2³)ˣ = 2³ˣ.

  14. negative exponent

    b−n=1bnb^{-n} = \frac{1}{b^n}

    An exponent below zero, meaning the reciprocal: b⁻ⁿ = 1/bⁿ, which is positive when b > 0.

    Loses the mark: “a negative exponent makes it negative”. It takes the reciprocal; 2⁻³ = 1/8 is positive.

    Example: With a negative exponent, 4⁻ˣ = (1/4)ˣ, so the function is decay.

  15. rational exponent

    bm/n=(bn)mb^{m/n} = (\sqrt[n]{b})^m

    An exponent m/n, meaning the nth root raised to the mth power: b^(m/n) = (ⁿ√b)ᵐ.

    Loses the mark: “multiply the base by the fraction”. 8^(1/3) is the cube root of 8, which is 2, not 8 × 1/3.

    Example: A monthly factor is 1.12 to the rational exponent 1/12, since twelve months make the yearly factor 1.12.

  16. exponential model

    y=a⋅bty = a \cdot b^t

    A model y = a·bᵗ: a is the initial amount, b the factor per time unit.

    Loses the mark: “add the percent each year”. Adding a fixed amount is linear; an exponential model multiplies by the factor.

    Example: An exponential model for the deposit is A = 500(1.03)ᵗ dollars after t years.

  17. half-life

    Units: time

    The time for a decaying quantity to halve; y = a·(1/2)^(t/h) for half-life h.

    Loses the mark: “loses half its amount each hour”. Halving happens once per half-life; put t divided by the half-life in the exponent.

    Example: With a half-life of 6 hours, 80 mg of the tracer leaves 80(1/2)^(12/6) = 20 mg after 12 hours.

  18. doubling time

    Units: time

    The time it takes a growing quantity to double; with doubling time T, y = a·2^(t/T).

    Loses the mark: “doubles every unit of time”. It doubles once per doubling time; the exponent is t/T, not t.

    Example: The culture has a doubling time of 20 minutes, so after one hour it is 2³ = 8 times its starting size.

  19. percent rate of change

    Units: percent per period

    The constant percent r an exponential quantity changes per period, giving factor 1 ± r.

    Loses the mark: “the factor equals the rate”. A 5% growth rate gives a factor of 1.05, not 0.05.

    Example: A percent rate of change of −8% per year gives the car's value the factor 0.92.

  20. natural base e

    e≈2.718e \approx 2.718

    The constant e ≈ 2.718, the base for continuous growth, as in y = a·eᵏᵗ.

    Loses the mark: “compounding more often gives unlimited money”. Continuous compounding approaches a limit set by e, not infinity.

    Example: Compounded continuously at 4%, a deposit grows with natural base e as A = 1000e^(0.04t).

  21. continuous compounding

    A=PertA = Pe^{rt}

    Compounding at every instant, so deposit P at annual rate r grows to Pe^(rt).

    Loses the mark: “continuous compounding multiplies by 1 + r each instant”. Each instant's growth is tiny; over a year the factor is e^r, not a new 1 + r every moment.

    Example: With continuous compounding at 5% a year, 2000 dollars grows to 2000e^(0.05·3) ≈ 2323.67 dollars in 3 years.

  22. residual

    y−y^y - \hat{y}

    The actual value minus the model's predicted value, for one data point.

    Loses the mark: “predicted minus actual”. The residual is actual minus predicted, so the sign is reversed.

    Example: The measured value was 52 and the model predicted 49, so the residual is 3 and the model underestimated.

  23. residual plot

    A plot of residuals against input; no pattern around 0 supports the model.

    Loses the mark: “a pattern in the residuals means a good fit”. A curved or fanning pattern shows the model misses a trend in the data.

    Example: The linear model's residual plot is U-shaped, so an exponential model is likely more appropriate.

  24. coefficient of determination

    r2r^2

    The value r² giving the share of output variation a regression model accounts for.

    Loses the mark: “a high r squared proves the model is right”. A curved trend can still give a high r²; check the residual plot and the context.

    Example: The coefficient of determination is 0.94, but the residual plot shows a curve, so the linear model is not the best choice.

  25. composition

    (f∘g)(x)=f(g(x))(f \circ g)(x) = f(g(x))

    The function f(g(x)), which applies g first and then applies f to g's output.

    Loses the mark: “multiply f and g”. f(g(x)) feeds g's output into f; it is not the product f(x)·g(x).

    Example: The composition C(T(h)) gives the cost of cooling for h hours, with T applied first.

  26. inner function

    In f(g(x)), the function g, applied first, whose output becomes the input of f.

    Loses the mark: “the function written first”. In f(g(x)), f is written first but g acts first.

    Example: In √(x² + 1) the inner function is x² + 1.

  27. outer function

    In f(g(x)), the function f, applied second, to the output of g.

    Loses the mark: “the function applied first”. The outer function acts last, on the inner function's output.

    Example: In (3x − 1)⁵ the outer function is u⁵.

  28. decomposition

    Writing a function as a composition of simpler functions, naming an inner and outer function.

    Loses the mark: “split it into a sum”. Decomposition writes a function as one function applied to another, not as a sum.

    Example: A decomposition of h(x) = e^(2x) uses inner g(x) = 2x and outer f(u) = eᵘ.

  29. inverse function

    f−1f^{-1}

    The function f⁻¹ that undoes f: f⁻¹(b) = a exactly when f(a) = b.

    Loses the mark: “one over f”. f⁻¹ undoes f; it is not the reciprocal 1/f(x).

    Example: Since C(F) converts Fahrenheit to Celsius, its inverse function F(C) converts Celsius back to Fahrenheit.

  30. one-to-one

    Said of a function in which different inputs always give different outputs.

    Loses the mark: “every function has an inverse”. A function that repeats an output, such as x², has no inverse on its whole domain.

    Example: Since f(x) = x³ + 2 is one-to-one, it passes the horizontal line test and has an inverse.

  31. domain restriction

    Limiting inputs to an interval where the function is one-to-one, so an inverse exists.

    Loses the mark: “cut off part of the graph”. Vague: state the interval of inputs on which the function is one-to-one.

    Example: With the domain restriction x ≥ 0, f(x) = x² has the inverse √x.

  32. reflection in the line y = x

    The flip sending (a, b) to (b, a), turning a graph into its inverse's graph.

    Loses the mark: “reflection over the y-axis”. Swapping inputs and outputs reflects in the line y = x, not in an axis.

    Example: The point (2, 9) on f gives (9, 2) on the inverse, by reflection in the line y = x.

  33. identity function

    f(f−1(x))=xf(f^{-1}(x)) = x

    The function returning every input unchanged, x ↦ x; f composed with f⁻¹ gives it.

    Loses the mark: “the compositions equal 1”. f(f⁻¹(x)) equals x, the input itself, not the number 1.

    Example: Since f(f⁻¹(x)) = x and f⁻¹(f(x)) = x, both compositions are the identity function, which confirms the inverse.

  34. logarithm

    log⁡bc=a  ⟺  ba=c\log_b c = a \iff b^a = c

    log_b c is the exponent on b giving c; b > 0, b ≠ 1, c > 0.

    Loses the mark: “divide by the base”. log₂ 8 is the exponent 3, not 8 divided by 2.

    Example: The logarithm log₂ 32 equals 5 because 2⁵ = 32.

  35. natural logarithm

    ln⁡x=log⁡ex\ln x = \log_e x

    The logarithm with base e, written ln x.

    Loses the mark: “ln is log base 10”. ln means base e; log with no base shown usually means base 10.

    Example: The natural logarithm ln 20 is about 3.0, since e³ ≈ 20.

  36. common logarithm

    log⁡x=log⁡10x\log x = \log_{10} x

    The logarithm with base 10, written log x.

    Loses the mark: “log means base e”. log with no base written means base 10; ln means base e.

    Example: The common logarithm of 5000 lies between 3 and 4, since 10³ < 5000 < 10⁴.

  37. exponential form

    Writing log_b c = a as bᵃ = c, the base raised to the logarithm's value.

    Loses the mark: “a to the b equals c”. The base of the log stays the base: log_b c = a becomes b to the a equals c.

    Example: In exponential form, log₃ 81 = 4 reads 3⁴ = 81.

  38. logarithmic function

    f(x)=log⁡bxf(x) = \log_b x

    A function f(x) = log_b x, the inverse of y = bˣ, with domain x > 0.

    Loses the mark: “the inverse is the reciprocal”. log_b x undoes bˣ; it is not 1/bˣ.

    Example: The logarithmic function f(x) = log₂(x − 3) has domain x > 3 and a vertical asymptote at x = 3.

  39. logarithmic growth

    Growth where multiplying input by a fixed factor adds a fixed amount to output.

    Loses the mark: “multiplying the input multiplies the output”. For a logarithm, multiplying the input adds to the output.

    Example: The rating shows logarithmic growth: each tenfold increase in sound intensity adds the same 10 points.

  40. product property of logarithms

    log⁡b(MN)=log⁡bM+log⁡bN\log_b(MN) = \log_b M + \log_b N

    Log of a product is the sum of the logs: log_b(MN) = log_b M + log_b N.

    Loses the mark: “the log of a sum is the sum of the logs”. The rule is about a product inside the log; log(M + N) cannot be split.

    Example: By the product property of logarithms, log 200 = log 2 + log 100 = log 2 + 2.

  41. quotient property of logarithms

    log⁡bMN=log⁡bM−log⁡bN\log_b \frac{M}{N} = \log_b M - \log_b N

    Log of a quotient is the difference of the logs: log_b(M/N) = log_b M − log_b N.

    Loses the mark: “the log of a quotient is the quotient of the logs”. It is a difference, not log M divided by log N.

    Example: The quotient property of logarithms gives ln(x/5) = ln x − ln 5.

  42. power property of logarithms

    log⁡bMp=plog⁡bM\log_b M^p = p \log_b M

    Log of a power is the exponent times the log: log_b(Mᵖ) = p·log_b M.

    Loses the mark: “bring down the exponent of the whole log”. Only an exponent on the argument comes out front; (log M)ᵖ does not simplify this way.

    Example: By the power property of logarithms, log₃(x⁴) = 4 log₃ x for x > 0.

  43. change-of-base formula

    log⁡bx=ln⁡xln⁡b\log_b x = \frac{\ln x}{\ln b}

    log_b x = log_a x / log_a b for any valid base a.

    Loses the mark: “log of the base over log of the number”. The formula is upside down that way; the argument's log goes on top.

    Example: By the change-of-base formula, log₂ 10 = ln 10 / ln 2 ≈ 3.32.

  44. extraneous solution

    A value the algebra produces that fails the original equation; it must be rejected.

    Loses the mark: “both answers work”. Check each candidate in the original equation's domain before keeping it.

    Example: x = −5 is an extraneous solution of log(x) + log(x + 3) = 1 because log(−5) is undefined.

  45. common base

    A single base used to rewrite both sides of an exponential equation, so exponents match.

    Loses the mark: “set the exponents equal with different bases”. Exponents can be equated only once both sides are powers of one base.

    Example: Writing 4ˣ = 32 with common base 2 gives 2²ˣ = 2⁵, so x = 5/2.

  46. reverse the inequality

    Flip an inequality's direction after applying a decreasing function to both sides.

    Loses the mark: “keep the direction for any base”. A base between 0 and 1 gives a decreasing function, which reverses order.

    Example: Since 0.5ˣ is decreasing, from 0.5ˣ > 0.5³ we reverse the inequality to get x < 3.

  47. logarithmic model

    y=a+bln⁡xy = a + b \ln x

    A model y = a + b·ln x, where multiplying x by a constant adds a constant.

    Loses the mark: “a is the value of the logarithmic model at x = 0”. ln 0 is undefined; a is the output when x = 1.

    Example: The logarithmic model y = 12 + 3 ln x says each doubling of study hours adds about 2.1 points.

  48. semi-log plot

    A graph with a logarithmic vertical axis, making exponential data a straight line.

    Loses the mark: “a straight line means the data are linear”. On a semi-log plot a straight line means the data are exponential.

    Example: On a semi-log plot the town's population lies along a line, so an exponential model fits.

  49. logarithmic scale

    An axis on which equal distances stand for equal ratios.

    Loses the mark: “evenly spaced values”. On a logarithmic scale equal spacing means equal ratios, not equal differences.

    Example: With a logarithmic scale, the marks 1, 10, 100 and 1000 are equally spaced.

  50. linearization

    log⁡y=log⁡a+xlog⁡b\log y = \log a + x \log b

    Rewriting y = a·bˣ as log y = log a + x·log b, a line in x.

    Loses the mark: “the slope is the growth factor”. The slope is log b; the growth factor is 10 raised to the slope.

    Example: After linearization the line has slope 0.3, so the growth factor is 10^0.3 ≈ 2.